http://www.northwest4x4.co.uk/forum/...rd_top_1_1.jpghi been reading quite a few jeep forums
i have a yj thats being built with unimog 404 axles but while thats being done i got a 97 tj cheep so after a couple of weeks in the unit it came out like this
Looking good.. have always been partial to that front bumper since it came out. Are those "real" lockers? If so what kind?
and if any ones interested this is where im upto with the yj
yes they are diy weld on beadlocks (they work realy good )first time out i riped a valve out of a tube and never noticed untill some one pointed out i just drove down a steep hill with a flat front tyre
over here theres a lack of decent parts for jeeps (unless you want bolt on bits)and most are for lhd jeeps so most wont fit without modds
and i like to make bits for my 4x4
so i made the front/rear bumpers rocker bars
and even made my own long arm kit (just had to buy the coils/dampers)
heres the ones for the yj
20" rims running 40/13.5/20 baja claws
|All times are GMT -5. The time now is 08:29 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.