Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   General Jeep Discussion (http://www.wranglerforum.com/f19/)
-   -   Failed md inspection ... Brake lines (http://www.wranglerforum.com/f19/failed-md-inspection-brake-lines-95600.html)

bashbro 05-27-2011 10:06 AM

Failed md inspection ... Brake lines
 
Failed Md inspection because my brake lines were not "secure". They re held in place at a couple point with some hefty zip ties. What do I replace the Zip ties with to make them secure.

geiman 05-27-2011 10:13 AM

Where exactly are they held in place with zip ties? At the common points where a bolt & bracket normally holds them?

PTWarrior66 05-27-2011 10:37 AM

MD state inspection can SMD.

I'm going to slap it if they don't pass me next week.

Shelby427 05-27-2011 10:43 AM

Well if you have a salvage yard nearby, stop and get what you need.

If not you can buy em. Either from Jeep or off the web.
Steel and Nylon Tubing Retainer Clips on FMSI


All times are GMT -5. The time now is 09:50 PM.