:surrender:Intalled a rebuilt 2.5 in my 89 Wrangler. The gaps in the teeth on the flywheel do not correspond to 90 degrees off of TDC from the Crank Position Sensor. Not suprising that the new motor runs like hell. The flywheel will only go on one way,,,so I guess I'm just screwed. Has anyone out there ever heard of such a thing. The timing isn't adjustable so the CKP has to jive with the gaps in the teeth. Anyone who can help !!!???:surrender:
06-02-2011 05:55 PM
What flywheel are you using, the original?
You might have got the wrong motor...
06-02-2011 06:11 PM
How many 2.5 4 cylinders were made in the 89 time frame? Asked the rebuilder if a manual or automatic would matter, they said no. Is there such a thing as different flywheels?? But yes, the orginal flywheel. Gaps in the teeth at 180 degrees. I've noticed the six cylinders have three gaps.
06-07-2011 11:03 PM
i have a 89 yj im parting out so if you need anything call me 604 378 7497 my name is jerry
06-08-2011 12:05 PM
Look at the engine they sent you and see if the number code is the same for your jeep, I bet it isn't.
06-08-2011 03:37 PM
I like that idea Gary.. I have the serial # off the new motor, and of course my VIN. But wouldn't know where to cross reference. The tag on the rebuilt also says 87-95 Jeep. To me that covers a lot of ground. If you or anyone can give me any insight. Steven 979-561-8343
06-08-2011 06:06 PM
Your engine code on the tag in the jeep will be the last three letters/numbers of the second row down. They made both the 2.4 and 2.5 between those dates.
Take a look at this, hope it helps/www.amcrc.com/tech/carsn.html