I have a 1990 Wrangler YJ. My emergency break pedal was broken. I got a pedal from a junkyard. I bolted the new pedal into place and my question is how do you get enough slack on the cable to hook it to the groove on the pedal itself?
01-21-2006 02:17 PM
The easiest way to do this would be to completely take the adjustment nut off your old cable. Then, after you hook it in, adjust it out to where it needs to be. Just remember, not too tight, or the E-brake will always have tension on your back brakes, causing them to wear out faster.
01-30-2006 04:00 AM
I have a 1990 Wrangler and took it to the dealer and the e-brake was under recall... hope it helps