Anyone know if 32 x 11.5 will rub on tj with canyon rims?
Thinking about picking up a set.
I'm gonna say there is a very good likelyhood that they will rub. 10.5 is about as wide as you can go on Canyons without spacers.
They will fit. I have a set of coopers on mine. Will rub on full turn though.
I used to run 32 x 11.5's muddies with a 2" OME lift on my '97*
Tires were mounted on stock 15x8 rims with 5.5" backspacing.
Had some rubbing in the front on full lock which was easily fixed with a couple of washers on the steering stops.
Things were really tight in the rear but never had any rubbing issues. Perhaps I'm not hardcore enough or just lucky. Could also be due to variances between tire manufacturers
Checked the speedo with a GPS and saw no difference, but again, I guess results will vary with different brands of tires, with them all being slightly different.
Also, the stock flares JUST covered the tires with the stock rims.
And had to remove the rubber bumps on the tailgate to mount the spare.
Actually the spare was mounted on a stock 15x7 rim.
* Now added a 1"BL and 33's
|All times are GMT -5. The time now is 05:24 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.