Hi Jeepers, I need some help. I recently bought a set of Black Rock 909's for the beast and I am having a problem with the center cap. There is only one screw that secures the cap to the rim and it is leaving a large gap on the other side of the cap. Any ideas on how to get the thing to stay flush? Thanks
06-15-2011 03:53 PM
Do they perhaps mount on the inside of the wheel? Other than that, Idk....
06-18-2011 02:32 AM
Solved the problem. I had the standard acorn style lug nuts which were causing the cap to seat improperly. I switched the lugs to a short open ended style and viola!, problem solved.
07-14-2011 07:28 AM
But there is still only only one bolt that holds this center cap on..isn't that starnge?
I've got these as well as was confused when I found this out.