Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   3" BL to 1.5" ?? (

OIA 06-23-2011 06:20 PM

3" BL to 1.5" ??
Ok I bought an 04 TJ 4.0l with a 3 inch BL already on it. I'm trying to get the stock cooling system back in it. The efan is not cutting the mustard. So in order to do so I want to install a ML and lower the BL without having to buy a new BL kit. I was planning on buying the 1 inch JKS budget ML.

What I'm thinking is cutting the 3 inch pucks in half. Run new bolts in it and go from there. Any ideas on what I can use to cut them in half? Also It's an automatic tranny, I know i'll have to adjust the TC linkage for sure. Any other problems that I might run into?

6InARowMakesItGo 06-23-2011 06:25 PM

use a band saw

Mortalis5509 06-23-2011 07:29 PM

Better measure them all perfect. Body could lean if not

All times are GMT -5. The time now is 03:11 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.