Jeep Wrangler Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 76 Results
  1. JK Technical Discussion
    My motor mounts are getting worn out, and need to be replaced. I am not able to find any good resources online to take this job on, I am looking for some tips or warnings to do it myself. If you have any references/ videos, etc that i can look at that would a lot too! Thanks!
  2. General Jeep Discussion
    I know that ducking can be a controversial subject. For those of you who are into it, and have a problem with ducks rolling all over your dash like I did, here’s your solution. I figured out a quick easy mount using a binder clip. It works so well that I thought I’d share. It certainly beats...
  3. YJ Technical Discussion
    I have a 1990 YJ Islander with an aftermarket hardtop. Back glass already a piece of shattered plexiglass. Anyone attempted a DIY liftgate build?? I'm looking at using 1/4" lexan and fitting the bottom with purchased trim for an original liftgate and glass seal. Thoughts on how to latch it...
  4. JK General Discussion
    For the past few years, I went to Canadian Tire for rust proofing, they never spray brackets, axles and control arms, I had to crawl down and spray it myself. I've decided to do the rustproofing myself. I'm wondering how big of a mess will a (Astrol) spray gun make in a 2 car garage? psi? how...
  5. JK Technical Discussion
    As from some of my posts could be deduced, I'm thinkin of regearing my Jeep. Or having it regeared. I would very much appreciate if those of you who've done it youselves would share your experiences here. Good or bad. Especially bad, if you are brave enough to admit failure or defeat in public...
  6. TJ How To Threads and Videos
    Hello everyone! Did a video on cheap, quick/no tools required install and removal mirrors. Check it out and let me know what you think!
  7. JK General Discussion
    Hello! This is one of my first posts on here, and I couldn't find this issue using the search... I have a 2010 JKU and it came with an awning. I cannot for the life of me get this thing to stay up. The poles use a really cheap plastic part to "twist and lock" however it is FLIMSY. I am looking...
  8. JK Technical Discussion
    Hey guys, New to the forum. Had a 2010 2 dr Islander, loved it, got totalled. Now I bought another 2010 4dr islander in January this year and have had some issues with electrical since I got it. The left headlight, and the interior overhead light flicker. The overhead light flickers the...
  9. TJ General Discussion
    There are a few threads dealing with building/buying roof racks for our Jeeps, but I could not find one dealing with my specific idea. I own a Barricade roof rack, but the thing is like 200+ lbf and adds a considerable amount of height and drag area to the Jeep. This results in a lot of noise...
  10. TJ General Discussion
    Finally had time to swap out my front rusted out fender! Only had hand tools so it took 8 hours, but was so worth it. Off to do the driver side today, hopefully every thing goes smoothly. Anyone else doing some DIY to their Jeeps during al these stay at home orders?
  11. General Jeep Discussion
    Went off Hiker J's video but changed it up a bit. No drill and completely removable.
  12. JK General Discussion
    Hey guys! I'm planning to use this quarantine time to get a couple of projects done. I have a 2 Door JK with the rear seats removed. I want to build something to completely cover the cargo area for when the top is off, but also have some storage compartments. I already have a couple...
  13. TJ Build Forum
    Years ago I pulled the nearly useless rear seat from my TJ. My TJ rear bed is very utilitarian but I have always wanted something better and more secure. A week ago I set out to build a fully enclosed trunk that blended in well, used all available space, would support my weight and is very...
  14. TJ General Discussion
    Ok so I'm posting this idea i came up with recently after making the mistake of buying aftermarket flares from a bad source (can explain if curious), but basically I want to put my stock flares back on my jeep but modify them in a way i have not seen anyone do yet and just trying to see what the...
  15. TJ Technical Discussion
    First post bear with me. So I've got an '01 TJ 4.0 Sport with a NV3550 and Dana 44. I seem to have lost fifth and reverse - I can put the shifter in position, but it feels like neutral and nothing is there. No grinding, no noises whatsoever. My thought is that either the shift fork is busted...
  16. JK General Discussion
    Trying to build a floating shelf/instatrunk to put behind the backseat in my two door. Does anyone know how I could recreate the photo with items from Home Depot? I want to create a bracket coming off the roll bar and then lay a piece of plywood across.
  17. JK General Discussion
    I wanted to share a few things that I built for my jeep. First is a removable no drilling tailgate shelf. I didn't want to drill into my brand new jeep and didn't want to buy something expensive so I built this shelf. It uses super strong magnets to hang off the back of the tailgate. A rubber...
  18. JL General Discussion
    Hi everyone! I am looking to have a big storage space that is lockable for my jeep. Whenever I go out without my doors and rooftop, I need a space to dispose my luggages safely! Anyone here has ever heard of a DIY or a specific product on the market for this?
  19. TJ General Discussion
    My rear window vinyl cracked in cold weather last winter, and I've had it held together with Tenacious Tape since then, but I'm looking into a more permanent fix before going into another winter. Looks like it might be possible to get some tinted 30-40 gauge marine vinyl, marine thread, bias...
1-19 of 76 Results
Top