New to the forum and hopefully new to wheelin in the next few months. A little back story behind how I got started. About a year ago I had an insane interest in convertibles but I wanted some "manly"
Not more than a year ago I picked up a 91 Jeep Wrangler with 3 speed I6 and a 231 t-case. The plan was that would end up being my dd. Well I got hired shortly afterwards at Advance Auto, parts became cheaper for me, and the mechanics of engines and such became more familiar. I then decided I was going to rip the engine out and drop in a 350. Makes a Chrysler better right?
Started looking on forums and stuff like that a started figuring out more and more of what I could do to it... It stuck and I'm now a Jeep Addict!
So I bought a 350 for about 160 bucks/ that's a long block (head's n' everything) bought a 4 speed granny low Muncie tranny and eventually when money becomes availible an np205 that again eventually will be dual sticked. After that the plans to find a set of 1 ton axles, D60's, Chevy, Ford, Chrysler. It don't matter, although I'd like to have a set of Chevys more just cause I'm addicted to Chevy's as well (sad cause we're few and far in between anymore!)... (A set of Rockwells wouldn't be to bad either!
And after that well see!
When the Jeep's up and running the plans to get out and start wheeling with either some of you guys, or maybe even get my mom's road princess off the road! (Not really likely)
But that's me everything Jeep! That's How I got started hope to be out wheeling with you guys soon!