Another Heater Issue - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 02-16-2014, 09:57 AM
Thread Starter
  #1
Jeeper
 
BooDie1821's Avatar
 
Join Date: Feb 2014
Location: Jersey Shore
Posts: 217
Another Heater Issue

Hey guys-

sorry for making yet another heater thread... i couldnt find an answer in the others.

i have a 2000 4.0 w/out AC. Heater is not working at all, no air coming from vents on any speed. Blower is not blowing.

i assumed the blower motor was the issue and replaced it, still nothing. i checked the fuses and they seem to be fine.

what should i do next? do you think its the resistor? maybe the switch itself?

im lost here!

BooDie1821 is offline   Quote
Old 02-16-2014, 11:32 AM   #2
Mostly old school..!

5-Year WF Supporting Member
 
Water Dog's Avatar
 
Join Date: Mar 2011
Location: Now searching for rocks in Sumner, TX
Posts: 12,149
Get a test lead with a couple of alligator clips, (or alligator clip and probe..a nail works) and first clip one end to a known good ground. Clip or probe the other end to the black wire in the two wire connector on the back of the switch, turn on the ignition and the heater and see if it works. If it does, you have a bad ground. If that doesn't do it, leave the clip on the known ground and probe the other end on the dark green wire in the 5 wire connector on the back of the switch and try again. If it works the problem is the mode switch. If it doesn't work probe the brown/tan wire in the same connector (with your grounded lead) and try again. If that works, it's your speed switch. Also check your connections first.

__________________
Dennis
Water Dog is offline   Quote
Old 02-21-2014, 06:38 PM
Thread Starter
  #3
Jeeper
 
BooDie1821's Avatar
 
Join Date: Feb 2014
Location: Jersey Shore
Posts: 217
so apparently i had multiple heat issues. after replacing the blower motor and fuse it still didn't work, so i tested the switches. mode switch was bad so i replaced the entire cluster just to be sure.

now i have heat!! but only on the highest fan speed

this has to be the resistor correct? i feel like its abnormal that my jeep had 3 issues with the heat system... maybe there was an electrical surge at some point.
BooDie1821 is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 12:16 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Jeep, Wrangler, Liberty, Wagoneer, Cherokee, Gladiator, Mopar and Grand Cherokee are copyrighted and trademarked to FCA US LLC.
Wranglerforum.com is not in any way associated with FCA US LLC.