Jeep Wrangler Forum banner

Only left turn signal, hazzards, and brake light not working.

910 views 4 replies 3 participants last post by  Nicyutrick 
#1 ·
What's up fellas. I need all your Jeep help I can get! I got an 06 Tj and I just opened the back left tail light to find the top bulb broken but I believe that's not the problem. Hazzards, turn signal, and brake light only for the left side isn't working. The right works. Something weird is the left turn signal flashes faster than the right turn signal also. I've been reading online about switches but idk because all their issues neither turn signal or brake lights don't work. Hope we can figure it out! Thanks guys n gals✊
 
#2 ·
So the bulb in the left side is broken? And that's also the side that blinks fast and is not working on brake or hazard?

Make sure you have all working bulbs in that side of the car. I had a bad connection with my front side marker light and it screwed up all of that side. Cleaned a little corrosion off that bulb and put it back and we're all good again. Craziness.

Do your lights have any mods? LED conversion or anything?
 
#4 ·
So the bulb in the left side is broken? And that's also the side that blinks fast and is not working on brake or hazard?

Make sure you have all working bulbs in that side of the car. I had a bad connection with my front side marker light and it screwed up all of that side. Cleaned a little corrosion off that bulb and put it back and we're all good again. Craziness.

Do your lights have any mods? LED conversion or anything?
Nope not at all. All stock. I replaced the light bulb and it's still not working :/
 
#3 ·
I was having similar problems, found corrosion in my taillight socket that was shorting between the taillight and running light. I cleaned out the corrosion, replaced the bulb and everything works fine. Check all 6 bulbs and sockets, when I reinstalled mine, I put a dab of dielectric grease on the bulb as preventive maintenance.

Good Luck.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top