aerosal spray liners - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 01-04-2013, 10:59 PM
Thread Starter
  #1
Jeeper
 
Join Date: Jan 2013
Posts: 50
aerosal spray liners

has anyone used any aerosol spray liners in the tub. if so what brand is good?

jdneal88 is offline   Quote
Old 01-05-2013, 12:18 AM   #2
Jeeper
 
mbaseel's Avatar
 
Join Date: Dec 2010
Location: Clackamas, OR
Posts: 157
I used the duplicolor aerosol spray 2 years ago. It is now grey instead of black an is peeling. I did a 2 day prep job... Sanded all surfaces I was going to spray and then put primer all surfaces then roughed the primer. It wasn't a prep problem. I am pretty sure it just isn't a great product. The next time I do liner. This summer... I will use either raptor liner that I did my top with and hasn't gotten a scratch on it in the year it has been on it and about 15 wheeling trips later. Or I will do the monsta liner. My advice is do it right with the good product the first time and don't waste your time or money in the cheap stuff.

mbaseel is offline   Quote
Old 01-05-2013, 09:36 AM   #3
Jeeper
 
Join Date: Dec 2012
Posts: 2,631
I only used a can of rock guard (kinda like rhyno lining but made more for rocker panels) in the foot areas only since its surface rust from boot moisture.
RevCo666 is offline   Quote
Sponsored Links
Advertisement
 
Old 01-05-2013, 05:26 PM   #4
Jeeper
 
raycer's Avatar
 
Join Date: Aug 2011
Location: Where NY/NJ/PA meet
Posts: 717
I used Rustoleum liner in a can and it's held up good for the past year
__________________
Ray
1993 YJ "ZORV-1122"
4.0 AX15 4in Rough Country Lift 1.25in Perf. Acc. Shackles, few other things here and there.
raycer is offline   Quote
Old 01-05-2013, 08:40 PM
Thread Starter
  #5
Jeeper
 
Join Date: Jan 2013
Posts: 50
thanks for the replies. mbaseel thanks for the info on the duplicolor that was one that is referenced to a bunch. i just found it hard to believe something from a can could be that great
jdneal88 is offline   Quote
Old 01-05-2013, 08:47 PM   #6
Jeeper
 
RandomYJguy's Avatar
 
Join Date: Nov 2012
Location: LaCrosse WI
Posts: 263
Ive used some rustoleum in a can for the inside of the Jeep. I only had for a bought a month... no problems really so far.
RandomYJguy is offline   Quote
Old 01-06-2013, 01:13 AM   #7
Jeeper
 
Huntsman180's Avatar
 
Join Date: Jul 2012
Location: Papillion, Nebraska
Posts: 325
I used a spray on (can) liner for the dash and it turned out absolutely horrible. Very Inconsistent, and there is a horrible mess of crumbs that fall off. Not at all a good quality. I wouldn't go for it if I were you. I regret doing what I did to my poor dash. I will be actually ROLLING it on like it should be done.
__________________
1993 YJ - (Soon to be 5.3L Vortec)
33" Firestone Destination MT Tires
2.5" Body Lift
BDS 2.5" Lift Kit + 1" Extended Shackles
AX-15 Trans
Stock Axles
Huntsman180 is offline   Quote
Old 01-06-2013, 01:23 AM   #8
Jeeper
 
Join Date: Sep 2012
Location: Carova beach North of Corolla Nc
Posts: 142
I did the duplicolor with Kevlar roll on liner in my tub and it has held up great! Really tough stuff and I got the kit with a gallon jug which had more than enough to do the inside. Prep is really important and putting it on nice and thick I did three coats to to inside of mine. Wouldn't recommend doing spray only but the spray is nice to hit the hard to reach areas I used less than a can on mine to hit high up in the fire wall. It's a little rough but it's got chunks on Kevlar, held up around a year and my jeep always has sand in the floor boards!
__________________
Losing faith in humanity one person at a time!
Airboatingobx is offline   Quote
Old 01-09-2013, 07:47 AM
Thread Starter
  #9
Jeeper
 
Join Date: Jan 2013
Posts: 50
thanks for all the info. i think im going to wait until this summer and just use a roll on liner and use some kind of undercoating on the places i cant roll or brush
jdneal88 is offline   Quote
Old 01-09-2013, 09:09 AM   #10
BAP
Jeeper
 
BAP's Avatar
 
Join Date: Jan 2012
Posts: 1,909
not in my jeep but i sprayed the racks on my 4wheeler with plastikote and it has held up great for 2 years now,,i live on a farm and always carrying chains,chain saws, metal posts,barb wire,etc,etc,--no fadeing or chiping,,,i abuse the crap out of it--im inpressed
BAP is offline   Quote
Old 01-09-2013, 09:48 AM   #11
Jeeper
 
angrysam's Avatar
 
Join Date: May 2012
Location: TC, MN
Posts: 38
I've had the best luck with Rustoelum's product. A few bumpers, an air tank and some wheels. All seem to be holding up. You usually have to either hold the can sideways or upside for the best results.
__________________
'15 Rubicon Hard Rock
angrysam is offline   Quote
Old 01-09-2013, 11:02 AM   #12
Jeeper
 
Join Date: Aug 2012
Posts: 90
I know it's not aerosol, but I just did my tub in Raptor Liner and it is fantastic.
With the right prep it bonds great, hasn't scratched yet and has a good texture to it.
Also, it comes with a spray gun that hooks up to a comressor and sprays so easily a 3yr old could do it.

The kit was only $125 and well worth it.

Do the math and calculate how many cans of aerosol you will need and I am sure you will be close to this dollar amount anyway.

Good luck and remember it is ALL in the prep.
Cowboy17 is offline   Quote
Old 01-09-2013, 11:20 AM   #13
Jeeper
 
klong21's Avatar
 
Join Date: Jan 2013
Location: Waynesville OH
Posts: 56
Do you have a link where I can buy that kit? With the gun?
__________________
-K.Long.
klong21 is offline   Quote
Old 01-09-2013, 02:46 PM
Thread Starter
  #14
Jeeper
 
Join Date: Jan 2013
Posts: 50
jdneal88 is offline   Quote
Old 01-10-2013, 04:56 PM   #15
Jeeper
 
Join Date: Aug 2012
Posts: 90
Truck Bed-Liner

they also have a tinable version. I absolutely love this stuff.
Cowboy17 is offline   Quote
Old 01-11-2013, 07:14 PM   #16
Jeeper
 
ThePhantomPatriot's Avatar
 
Join Date: Jul 2012
Location: Delta, PA
Posts: 266
I did 2 coats of the rustoleum bed liner on my front bumper about a month ago and haven't had any issues yet.
__________________
1995 - 2.5L Low Output Wrongler
ThePhantomPatriot is offline   Quote
Old 01-12-2013, 06:56 PM   #17
Jeeper
 
Join Date: Feb 2011
Posts: 126
bed liner

I did both the roll on kit and spray cans from Rustolium. The roller method leaves a much rougher surface. Spray leaves a nice uniform surface. I sprayed the tight spots. I would tape everything off good. IMHO. I would spray the whole thing if I would do it again.
__________________
Enjoy the ride, LIFE!
Captainrichhill is offline   Quote
Old 01-12-2013, 08:31 PM   #18
Jeeper
 
Join Date: Feb 2011
Posts: 126
bed liner

oops!

Captainrichhill is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 05:30 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC