Clutch master and slave? - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Like Tree2Likes
  • 2 Post By 12b
Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 12-02-2019, 02:26 PM
Thread Starter
  #1
12b
Jeeper
 
12b's Avatar
 
Join Date: May 2019
Location: Upstate SC
Posts: 501
Clutch master and slave?

Got a leak in the clutch slave in my '94 2.5 want a Luk but getting conflicting info. One ad says it is pre bled and another says it's not. LuK part #CRS032.
So which is it? Calling LuK is out of the question because they are located in Singapore

Also looking at the AMS part # PS0115 it is pre filled/bled I've never heard of them. Am wondering if they are any good?

__________________

'98 TJ 5 speed, 5.13 Super 35, D30 w/Aussie, Core 4x4 arms, Metalcloak front track bar, JKS rear track bar, ZJ tie rod conversion, 9500 Lb winch 4" lift sitting on 33's along with many others mods
'94 YJ 5sp 5.13, Super 35, HP30 w/Aussie, sitting on 33's, RE chromo drag link, 9500 Lb winch, 3" lift, 4x4 Posi Lock, it's a resto-mod in progress.
12b is offline   Quote
Old 12-02-2019, 06:06 PM   #2
Supporting Member

5-Year WF Supporting Member
 
Got it at last's Avatar
 
Join Date: Nov 2016
Location: Phoenix, Az
Posts: 2,108
Put that exact one in on mine a couple months ago, came pre filled and assuming it was bre-bled (whoops you know what that means) as it worked fine out of the box, checked fluid after a couple hundred miles and was still at fill level.

Side note, it comes with a wider spacing between the bolts on the master than my '89 non external. Had to drill another hole in the master to bolt up to the stock studs. I think it should be perfect for your '94 though...

__________________
'89 YJ 4.2 with MC-2150 Carb & HEI, 2-1/2" Magnaflow Ex. AX-15, NP231, Adams front shaft, SYE, 31x10.5x15 BFG KO's, 2 1/2" RE Springs, 1" BL. RS5000x, Hella H-4's, XRC 9500 Winch
'88 Sahara, 4.2, Weber 38, HEI, BA-10, np231, Hardtop, 31x10.5x15 Cepek FC's.
'06 WK, '05 WK,

FSM Manuals https://www.dropbox.com/sh/0vfmk6jc5...v7lceZk7a?dl=0
Got it at last is online now   Quote
Old 12-02-2019, 06:17 PM
Thread Starter
  #3
12b
Jeeper
 
12b's Avatar
 
Join Date: May 2019
Location: Upstate SC
Posts: 501
Which one the LuK or the AMS?
__________________

'98 TJ 5 speed, 5.13 Super 35, D30 w/Aussie, Core 4x4 arms, Metalcloak front track bar, JKS rear track bar, ZJ tie rod conversion, 9500 Lb winch 4" lift sitting on 33's along with many others mods
'94 YJ 5sp 5.13, Super 35, HP30 w/Aussie, sitting on 33's, RE chromo drag link, 9500 Lb winch, 3" lift, 4x4 Posi Lock, it's a resto-mod in progress.
12b is offline   Quote
Sponsored Links
Advertisement
 
Old 12-02-2019, 06:33 PM   #4
Supporting Member

5-Year WF Supporting Member
 
Got it at last's Avatar
 
Join Date: Nov 2016
Location: Phoenix, Az
Posts: 2,108
Sorry, LuK part #CRS032.
__________________
'89 YJ 4.2 with MC-2150 Carb & HEI, 2-1/2" Magnaflow Ex. AX-15, NP231, Adams front shaft, SYE, 31x10.5x15 BFG KO's, 2 1/2" RE Springs, 1" BL. RS5000x, Hella H-4's, XRC 9500 Winch
'88 Sahara, 4.2, Weber 38, HEI, BA-10, np231, Hardtop, 31x10.5x15 Cepek FC's.
'06 WK, '05 WK,

FSM Manuals https://www.dropbox.com/sh/0vfmk6jc5...v7lceZk7a?dl=0
Got it at last is online now   Quote
Old 12-02-2019, 06:35 PM   #5
Supporting Member

5-Year WF Supporting Member
 
Got it at last's Avatar
 
Join Date: Nov 2016
Location: Phoenix, Az
Posts: 2,108
SoCal likes the Sachs, but they were out of stock at Rockauto when I ordered mine, so I went with the LUK, not disappointed
__________________
'89 YJ 4.2 with MC-2150 Carb & HEI, 2-1/2" Magnaflow Ex. AX-15, NP231, Adams front shaft, SYE, 31x10.5x15 BFG KO's, 2 1/2" RE Springs, 1" BL. RS5000x, Hella H-4's, XRC 9500 Winch
'88 Sahara, 4.2, Weber 38, HEI, BA-10, np231, Hardtop, 31x10.5x15 Cepek FC's.
'06 WK, '05 WK,

FSM Manuals https://www.dropbox.com/sh/0vfmk6jc5...v7lceZk7a?dl=0
Got it at last is online now   Quote
Old 12-02-2019, 06:46 PM
Thread Starter
  #6
12b
Jeeper
 
12b's Avatar
 
Join Date: May 2019
Location: Upstate SC
Posts: 501
Ok thanks


I've had good service out the LuK clutch kit I put in my TJ 3 years ago didn't have to change the slave or master at that time... The TJ guys claim either the LuK or the Sachs clutch kits and parts are the best
__________________

'98 TJ 5 speed, 5.13 Super 35, D30 w/Aussie, Core 4x4 arms, Metalcloak front track bar, JKS rear track bar, ZJ tie rod conversion, 9500 Lb winch 4" lift sitting on 33's along with many others mods
'94 YJ 5sp 5.13, Super 35, HP30 w/Aussie, sitting on 33's, RE chromo drag link, 9500 Lb winch, 3" lift, 4x4 Posi Lock, it's a resto-mod in progress.
12b is offline   Quote
Old 12-02-2019, 07:11 PM   #7
Moderator

WF Lifetime Member
WF Supporting Member
::WF Moderator::
 
Luckymac's Avatar
 
Join Date: Jan 2014
Location: SouthEast of Denver
Posts: 9,529
Quote:
Originally Posted by Got it at last View Post
Side note, it comes with a wider spacing between the bolts on the master than my '89 non external. Had to drill another hole in the master to bolt up to the stock studs. I think it should be perfect for your '94 though...
I've heard this about installing a '94-'95 clutch master cylinder in an earlier YJ. It seems like a very simple and easy modification.

Good Luck, L.M.
Luckymac is offline   Quote
Old 12-02-2019, 07:16 PM   #8
Supporting Member

5-Year WF Supporting Member
 
Got it at last's Avatar
 
Join Date: Nov 2016
Location: Phoenix, Az
Posts: 2,108
Quote:
Originally Posted by Luckymac View Post
I've heard this about installing a '94-'95 clutch master cylinder in an earlier YJ. It seems like a very simple and easy modification.

Good Luck, L.M.
It was not hard, just have to be careful with the drill as the fluid line and slave are all attached and you have to be mindful with the drill bit. If I had to do it again I would ditch the drill after a pilot hole and go to a Dremel tool or such with a reamer bit.
__________________
'89 YJ 4.2 with MC-2150 Carb & HEI, 2-1/2" Magnaflow Ex. AX-15, NP231, Adams front shaft, SYE, 31x10.5x15 BFG KO's, 2 1/2" RE Springs, 1" BL. RS5000x, Hella H-4's, XRC 9500 Winch
'88 Sahara, 4.2, Weber 38, HEI, BA-10, np231, Hardtop, 31x10.5x15 Cepek FC's.
'06 WK, '05 WK,

FSM Manuals https://www.dropbox.com/sh/0vfmk6jc5...v7lceZk7a?dl=0
Got it at last is online now   Quote
Old 12-06-2019, 02:53 PM
Thread Starter
  #9
12b
Jeeper
 
12b's Avatar
 
Join Date: May 2019
Location: Upstate SC
Posts: 501
Just an update the LuK CRS032 is pre-filled/bled fits a '94 like it should and works great out of the box. Had to add a couple pieces of rubber hose as insulation in a couple of areas of the fluid line that looked like potential rub spots but that's just my need of over doing things kicking in.
Got it at last and Krangler87 like this.
__________________

'98 TJ 5 speed, 5.13 Super 35, D30 w/Aussie, Core 4x4 arms, Metalcloak front track bar, JKS rear track bar, ZJ tie rod conversion, 9500 Lb winch 4" lift sitting on 33's along with many others mods
'94 YJ 5sp 5.13, Super 35, HP30 w/Aussie, sitting on 33's, RE chromo drag link, 9500 Lb winch, 3" lift, 4x4 Posi Lock, it's a resto-mod in progress.
12b is offline   Quote
Old 12-11-2019, 09:59 AM   #10
Newb
 
LAGeiger's Avatar
 
Join Date: Apr 2017
Location: Cocoa, FL
Posts: 3
Clutch master and slave?

Hi. I bought the empty one because it was cheaper. Never could get it to pump up. Tried all of the tricks people do. Went back, bought the pre-bled one, installed it in about 15 minutes. Has worked fine for 3 years. If I have another problem, guess which one I'll get?

LAGeiger is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 08:51 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, Gladiator, Mopar and Grand Cherokee are copyrighted and trademarked to FCA US LLC.
Wranglerforum.com is not in any way associated with FCA US LLC.