connector type? - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Like Tree2Likes
  • 1 Post By JonStevens
  • 1 Post By Wowreefer
Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 03-20-2019, 05:06 PM
Thread Starter
  #1
Jeeper
 
Join Date: Jul 2018
Posts: 17
connector type?

Can Anyone ID this type of connector?


I need one with a few inches of good wiring to spice into my harness,old one broke at the plug for the fuel sender/pump inside the drivers rear wheel well.





this is the image of the crankshaft position sensor which is identical except for the small bump out on the right hand side.


I've done some research and cant find one.

westiemax is offline   Quote
Old 03-20-2019, 05:41 PM   #2
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
Try work formerly Delphi https://ecat.aptiv.com/feature search on features 3pos sealed and color.

Wowreefer is offline   Quote
Old 03-20-2019, 05:44 PM   #3
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
It looks like aptiv formerly dephi...edit
Wowreefer is offline   Quote
Sponsored Links
Advertisement
 
Old 03-20-2019, 06:06 PM   #4
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
Looks like a metri Pack series 12110293 but I don’t have size reference. TE has a competitor cross reference available and you can order samples from them if there is a cross.
Wowreefer is offline   Quote
Old 03-20-2019, 06:41 PM   #5
Jeeper
 
agalloch07's Avatar
 
Join Date: Aug 2016
Posts: 3,424
Quote:
Originally Posted by Wowreefer View Post
Looks like a metri Pack series 12110293 but I don’t have size reference. TE has a competitor cross reference available and you can order samples from them if there is a cross.



How do you look up these connectors on the website? I am clicking around and not really finding anything. I am looking for a 4 pin connector for the O2 sensor on my wrangler and have not been able to find one. If i could find it on this website i would order one.
agalloch07 is offline   Quote
Old 03-20-2019, 07:14 PM   #6
Los Angeles

5-Year WF Supporting Member
 
JonStevens's Avatar
 
Join Date: Oct 2018
Posts: 927
Quote:
Originally Posted by agalloch07 View Post
How do you look up these connectors on the website? I am clicking around and not really finding anything. I am looking for a 4 pin connector for the O2 sensor on my wrangler and have not been able to find one. If i could find it on this website i would order one.
A lot of oxygen sensors are used for a lot of applications, I would guess the harnesses are too?
Attached Thumbnails
Click image for larger version

Name:	78F01414-3661-40A0-8F89-78922D3DA663.jpg
Views:	14
Size:	153.1 KB
ID:	4136437   Click image for larger version

Name:	AF689842-5950-456E-99ED-45147811F209.jpg
Views:	17
Size:	163.9 KB
ID:	4136439  

agalloch07 likes this.
__________________
1993 Wrangler YJ MPFI 4.0 HO m/t 5 spd
JonStevens is online now   Quote
Old 03-20-2019, 07:23 PM   #7
Los Angeles

5-Year WF Supporting Member
 
JonStevens's Avatar
 
Join Date: Oct 2018
Posts: 927
Quote:
Originally Posted by westiemax View Post
Can Anyone ID this type of connector?


I need one with a few inches of good wiring to spice into my harness,old one broke at the plug for the fuel sender/pump inside the drivers rear wheel well.





this is the image of the crankshaft position sensor which is identical except for the small bump out on the right hand side.


I've done some research and cant find one.
Maybe if you can’t find a match, get a matching set and splice them both in, why not?
__________________
1993 Wrangler YJ MPFI 4.0 HO m/t 5 spd
JonStevens is online now   Quote
Old 03-20-2019, 07:43 PM   #8
Jeeper
 
notthemaniusedtobe's Avatar
 
Join Date: Feb 2016
Location: San Diego, CA
Posts: 154
There's a 3-pin male/female connector with pigtails on both ends available on Amazon that might do what you want. Comes in a pack of 5.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I used this and a few of the 2-pin version (speakers) to re-wire my stereo in my console to unplug everything from under the seat. Now I can remove the console quickly and leave the stereo in place
__________________
1995 YJ, 2.5L 5-spd
4" ProComp lift, 32" BFGs, SYE
4.56, Eaton E-lockers front/rear, Ten Factory axle shafts
notthemaniusedtobe is offline   Quote
Old 03-20-2019, 07:53 PM
Thread Starter
  #9
Jeeper
 
Join Date: Jul 2018
Posts: 17
i could but i dont have enough slack on the tanks side to do it, id have to drop the tank a task i was trying to avoid.
westiemax is offline   Quote
Old 03-20-2019, 07:56 PM
Thread Starter
  #10
Jeeper
 
Join Date: Jul 2018
Posts: 17
Quote:
Originally Posted by Wowreefer View Post
Looks like a metri Pack series 12110293 but I don’t have size reference. TE has a competitor cross reference available and you can order samples from them if there is a cross.

What site is "TE"? Sorry if it a stupid question.
westiemax is offline   Quote
Old 03-20-2019, 08:37 PM   #11
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
Te.com The aptiv website is difficult to navigate but select any metri-pack connector and under documents there is a pdf catalog of that type.
Attached Thumbnails
Click image for larger version

Name:	C1A3CBF6-C9B6-4A64-8CA9-E1C86B4DD51A_1553132212221.jpg
Views:	21
Size:	155.7 KB
ID:	4136457   Click image for larger version

Name:	DF56F104-4886-4851-B323-55BB94C6B143_1553132229555.jpg
Views:	16
Size:	115.6 KB
ID:	4136459  

Wowreefer is offline   Quote
Old 03-20-2019, 08:39 PM   #12
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
Google te competitor cross reference and a link should show up.
Wowreefer is offline   Quote
Old 03-20-2019, 10:33 PM   #13
Jeeper
 
agalloch07's Avatar
 
Join Date: Aug 2016
Posts: 3,424
Quote:
Originally Posted by Wowreefer View Post
Te.com The aptiv website is difficult to navigate but select any metri-pack connector and under documents there is a pdf catalog of that type.



I hate to hijack this thread but since you actually know how to use this site i have some questions. The rubber seal on my O2 sensor is in really bad shape and i need to replace it the rest of the plug is fine. I really dont want to buy a $40 replacement plug of i dont have too.



I am on the te.com website clicking around and i see they have a page for seals and cavity plugs https://www.te.com/usa-en/plp/automo...ugs/Y30g1.html


I am not sure what size the seal it but im just clicking options to narrow it down to see if they have any square ones that look like they might work before i go get under my jeep with a micrometer and start taking measurements. But i dont see anything that looks like it will fit, am i in the wrong area? It looks like all 1 wire stuff.
agalloch07 is offline   Quote
Old 03-20-2019, 10:39 PM   #14
Jeeper
 
agalloch07's Avatar
 
Join Date: Aug 2016
Posts: 3,424
This looks like the factory stereo connector that everyone complains that the previous owner cut off. This site has so much stuff and is so confusing but i think i am going to be spending a lot of time here trying to figure it all out and maybe ordering some samples LMAO!



https://www.te.com/usa-en/product-171354-1.html
agalloch07 is offline   Quote
Old 03-21-2019, 09:52 AM   #15
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
I believe this is the oxygen connector, the terminals are separate.
Attached Files
File Type: pdf aptive connecotr.pdf (503.4 KB, 9 views)
File Type: pdf 1210565.pdf (380.6 KB, 8 views)
Wowreefer is offline   Quote
Old 03-21-2019, 10:48 AM   #16
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
Available through mouser
Wowreefer is offline   Quote
Old 03-21-2019, 11:05 AM   #17
Jeeper
 
agalloch07's Avatar
 
Join Date: Aug 2016
Posts: 3,424
Quote:
Originally Posted by Wowreefer View Post
I believe this is the oxygen connector, the terminals are separate.



awesome thanks i found it for $6 on ebay now i can get my O2 sensor sealed up without paying $40
agalloch07 is offline   Quote
Old 03-23-2019, 02:41 PM
Thread Starter
  #18
Jeeper
 
Join Date: Jul 2018
Posts: 17
new pictures I need the right side male plug.



still cant find a match from the metri pack line.
Attached Thumbnails
Click image for larger version

Name:	IMG_6450.jpg
Views:	9
Size:	147.7 KB
ID:	4137087   Click image for larger version

Name:	IMG_6449.jpg
Views:	8
Size:	99.5 KB
ID:	4137089  

westiemax is offline   Quote
Old 03-24-2019, 07:32 PM   #19
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
I have more resources at work.I will check it out in the morning.
westiemax likes this.
Wowreefer is offline   Quote
Old 03-27-2019, 01:36 PM   #20
Jeeper
 
agalloch07's Avatar
 
Join Date: Aug 2016
Posts: 3,424
Quote:
Originally Posted by Wowreefer View Post
I have more resources at work.I will check it out in the morning.



Since you seem to be a connector guru maybe you could help me and others out here https://www.wranglerforum.com/f218/o...l#post34256901
agalloch07 is offline   Quote
Old 03-27-2019, 10:30 PM   #21
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
@West field I'm still looking but the round contacts are throwing me..I checked the yazaki, sumitomo and packard/dephi/active catalogs. The housing is familiar the contacts are not.
Keeping the faith though. But I still have to do real work, plus my own "homework". I'm drawing up a anti wrap assembly to have my vendors quote. Nice to have access to vendors with laser and waterjets.
Wowreefer is offline   Quote
Old 03-27-2019, 10:31 PM   #22
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
@West field I'm still looking but the round contacts are throwing me..I checked the yazaki, sumitomo and packard/dephi/active catalogs. The housing is familiar the contacts are not.
Keeping the faith though. But I still have to do real work, plus my own "homework". I'm drawing up a anti wrap assembly to have my vendors quote. Nice to have access to vendors with laser and waterjets.
Wowreefer is offline   Quote
Old 04-12-2019, 12:09 PM   #23
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
connector ID

Try this link for connector info: https://www.whiteproducts.com/catalo...ctsCatalog.pdf
Wowreefer is offline   Quote
Old 04-13-2019, 10:03 AM   #24
Jeeper
 
Krangler87's Avatar
 
Join Date: Mar 2017
Location: Alasippie
Posts: 234
If you have a contact with a GM service tech or dept. they have, or at least use to have, a large collection of Packard Electric, aka Delphi, Yazaki, etc. They might let you peruse through the boxes for your connector.?
__________________
87 Wrangler
4 banger
5spd
4"lift
33"s
Krangler87 is online now   Quote
Old 04-13-2019, 03:17 PM   #25
Jeeper
 
Gottagofast's Avatar
 
Join Date: May 2017
Posts: 7,170
__________________
I come in peace.... I mean you no harm
Currently in the stable: .....97 tj 2.5 5 speed stock... 97 tj 4.0 5 speed stock....04 tj 4.0 auto 4" and 33's... 98 tj roller for future build... 94 yj sahara 4.5" RE and 33's... 92 yj sbc 3/4 ton axles and 38's... Cj5,7,yj,xj,ex mud dragster project

TJ dash speakers that actually rock! Kicker sub and amp in center console
Gottagofast is online now   Quote
Old 04-13-2019, 03:52 PM   #26
Jeeper
 
Wowreefer's Avatar
 
Join Date: Dec 2018
Location: Carlsle, Pa
Posts: 38
My post was to identify different connectors not necessarily a particular connector. Waste of money to buy complete wire assembly when connectors are really cheap through distributors.
And free samples are sometimes available.
Wowreefer is offline   Quote
Old 04-13-2019, 09:22 PM   #27
Jeeper
 
Gottagofast's Avatar
 
Join Date: May 2017
Posts: 7,170
I was addressing the issue of the fellow who started the thread

__________________
I come in peace.... I mean you no harm
Currently in the stable: .....97 tj 2.5 5 speed stock... 97 tj 4.0 5 speed stock....04 tj 4.0 auto 4" and 33's... 98 tj roller for future build... 94 yj sahara 4.5" RE and 33's... 92 yj sbc 3/4 ton axles and 38's... Cj5,7,yj,xj,ex mud dragster project

TJ dash speakers that actually rock! Kicker sub and amp in center console
Gottagofast is online now   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 08:46 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC