Jeep Wrangler Forum banner

2017 LEDs in a 2012 JK

759 views 9 replies 4 participants last post by  Kraxler 
#1 ·
Quick question. I have a chance to pick up some 2017 Wrangler Rubicon JKU LED headlight take offs here. Are these a simple plug and play for my 2012 JK?
 
#2 ·
Yes they are plug and play. You will probably want to get the 5sx sales code added to eliminate flicker. Also the lights may have some slight damage to the mounting holes. Not a big issue. I solved the problem of them being slightly loose with a zip tie.
 
#5 ·
I appreciate it! I really want LEDs just don't want the conversion to be a big hassle.
 
#7 ·
It may be easier for you to get something like the quadratec kit then. They include an anti flicker harness and its just plug and play the install takes less time than it takes to remove the grille.
 
#10 ·
Just my observation. I ran some trucklites with an anti flicker harness and did not like it. There was a noticeable delta going from low to high and back to low. I found it distracting and Aldo had a tendency to blind on coming drivers with the delay.

On another thread folks have had the 5sx sales code installed on 2012s
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top