95 no power to coil - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ General Discussion Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 06-28-2019, 06:06 PM
Thread Starter
  #1
Newb
 
Join Date: Jun 2019
Posts: 2
95 no power to coil

Hi I have a 95 yj with the 2.5l in it and this has been my first car and I’ve been working on it for 3 years and am having a major problem, driving like normal it quit with no spark and an engine light. I’ve been trying to check the codes but when I go to check it won’t blink like it has before, I’ve tried many times and it just stays lit up when I do the on off on off on method. So knowing as much as I know I first checked and no power out of the coil so I replaced the coil and decided to do cap and rotor because I haven’t before, still no spark, no power out of coil to distributor. I checked the crank position sensor and it was good and I also replaced the stator (cam position sensor). I’m stuck on what to do and frustrated that I can’t retrieve any codes, been looking on a lot of forums and couldn’t find this problem. Can someone please help me

Brendanbaker22 is offline   Quote
Old 06-28-2019, 06:55 PM   #2
Jeeper
 
agalloch07's Avatar
 
Join Date: Aug 2016
Posts: 3,483
Did you check the ignition fuse under the dash?

__________________
94, 4.0/NV4500/NP231HD w/JB Conversions super short SYE, 4.5" Rubicon Express lift, JKS 1.25" body lift, Dana 489's w/OX lockers 4.88 gears, Tom Woods drveshafts, 35" BFG KM3's, WFO boomerang shackles, Warn XD9000 winch, Doug Thorley header, JBA mid pipe, Borla cat back.
agalloch07 is offline   Quote
Old 06-28-2019, 09:07 PM   #3
Moderator

WF Lifetime Member
WF Supporting Member
::WF Moderator::
 
Luckymac's Avatar
 
Join Date: Jan 2014
Location: SouthEast of Denver
Posts: 8,553
Welcome to the Forum Brendanbaker22,

Look for a post by Got it at last. He posts often so finding one of his posts should be easy.
Look in his signature for a link to several Jeep manuals. Find one that's close to fitting your year Jeep. Find the "no start" troubleshooting flowchart and follow it. The flowchart might be in the engine section if I remember correctly.
Proper diagnosing an issue is way cheaper that simply guessing and replacing parts that might be good.
In following the flowchart, you might even get to buy a few new tools (which is always a good thing).

Good Luck, L.M.
__________________
"Wrangler....It's not just a vehicle, It's a lifestyle".
.................................................. ........................
1987 YJ-4.2L-Standard Shift- Re-manufactured Carter Carb-2" body Lift-31X10.5X15 BFG KOs-190K Miles No back seat.
HEI distributor with computer and all related relays and wiring removed.
12K Badlands winch with dual batteries.
Warn front bumper. Matching imitation Warn bumper on the rear.
Luckymac is offline   Quote
Sponsored Links
Advertisement
 
Old 06-28-2019, 09:44 PM   #4
Supporting Member

5-Year WF Supporting Member
 
Got it at last's Avatar
 
Join Date: Nov 2016
Location: Phoenix, Az
Posts: 1,692
Manuals in the dropbox link below, pick your year and scroll through till you get to the flow charts Agalloch07 mentions to help you diagnose your issue, then you can find the repair procedures per Factory recommendationsm sorry I can't help you with the 2.5, but your welcome to use my research materials.

Good Luck and Welcome,
__________________
'89 YJ 4.2 with MC-2150 Carb & HEI, 2-1/2" Magnaflow Exhaust. BA-10, NP231, Adams front Diveshaft, SYE kit, 31x 10.5 x15 BFG KO's, 2 1/2" RE Springs, 1" Body Lift. RS5000x shocks, Hella H-4's, No emissions.

FSM Manuals https://www.dropbox.com/sh/0vfmk6jc5...v7lceZk7a?dl=0
Got it at last is online now   Quote
Old 06-29-2019, 12:13 PM
Thread Starter
  #5
Newb
 
Join Date: Jun 2019
Posts: 2
I am unclear on how to find the Dropbolink, but thank you for letting me use them in advance I really appreciate it
Brendanbaker22 is offline   Quote
Old 06-29-2019, 07:28 PM   #6
Supporting Member

5-Year WF Supporting Member
 
Got it at last's Avatar
 
Join Date: Nov 2016
Location: Phoenix, Az
Posts: 1,692
Look at the bottom of my post where it says FSM manuals. click on that link, it will open up a new pdf page for you.

__________________
'89 YJ 4.2 with MC-2150 Carb & HEI, 2-1/2" Magnaflow Exhaust. BA-10, NP231, Adams front Diveshaft, SYE kit, 31x 10.5 x15 BFG KO's, 2 1/2" RE Springs, 1" Body Lift. RS5000x shocks, Hella H-4's, No emissions.

FSM Manuals https://www.dropbox.com/sh/0vfmk6jc5...v7lceZk7a?dl=0
Got it at last is online now   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 12:43 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Jeep, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC