A couple questions - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ General Discussion Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 08-08-2012, 06:59 AM
Thread Starter
  #1
Jeeper
 
Cougarman69's Avatar
 
Join Date: Aug 2012
Posts: 19
A couple questions

Hey, this is my first jeep and I was wondering if they make upper door Halves for the hard top? If any one has seen them on the buy sell trade let me know cause I can't find them. Another thing is that my heater core needs replaced, would this result in a light smoking out of the heater vent? And lastly, maybe a dumb question but I see many jeeps that have suspension that seems to make the body sort of level out when on a bolder etc. Is there a certain part that could make that happen? When I am on an incline it seems to just want to flop over and it has skyjacker hydro 7000 shocks and Dakar emu on mine. Not sure about this please respond with your thought\tips please! Thank you

Cougarman69 is offline   Quote
Old 08-10-2012, 12:56 PM   #2
Jeeper
 
0III0forlife's Avatar
 
Join Date: Mar 2012
Location: Ridgway, Pa.
Posts: 4,757
They do make upper door halves for the doors, but not to specifically match your hard top. You can get uppers from Bestop with the rounded back corners that are close, but it wont be a water tight seal.

Half doors are designed to be used with a soft top, not a hard top.

As far as the "light smoking" out of the heater vent, does it smell like anti-freeze? Then its a heater core replacement that is needed.

For the lift question. Lift kits are made differently. Some are designed for wheel travel, they are called long arm kits. With your YJ, does it still have the track bars installed? How about the sway bar up front? Both of these items limit the axles for the amount of drop that you get.

A YJ isnt designed to get major flex out of it with stiff lift springs and heavy shocks. You can get quite a bit of flex if you install a set of quick disconnects on the sway bar, this will let your front end pivot more. Just remember to hook it back up before you get back onto pavement or you will be unpleasantly surprised when the Jeep gets all "squirrely" going down the road.

Hope this answers some of your questions...

0III0forlife is offline   Quote
Old 08-10-2012, 07:30 PM   #3
Jeeper
 
Blackshjeep's Avatar
 
Join Date: Aug 2011
Posts: 1,238
You can get upper hard doors that work with a hard top, but they are not cheep you can find them on ebay. Or from direct manufacturing companys. You can also use a set of Tj upper soft doors but will need a little modification for the rear pin
Blackshjeep is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 09:58 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, Gladiator, Mopar and Grand Cherokee are copyrighted and trademarked to FCA US LLC.
Wranglerforum.com is not in any way associated with FCA US LLC.