Jeep Wrangler Forum banner

Cup Holder for Jeep Center Console

3K views 8 replies 6 participants last post by  brrang 
#1 ·
The plastic cup holder for my center console dried out, cracked, broke, and fell down into the center console today. I thought about buying a new console, but decided just a cup holder will do. So, I took an hour our of my day and drew this up. I will 3D print it Monday and let you guys know how it goes.

It is deeper than the original and only one size circle all the way down. I always found that the smaller circle just got in the way and made my cups sit uneven. I have also modified the center part so that a cellphone will fit (even in a large case). There is even a cutout for coffee cup handles.

I will gladly send the .ipt or .stl file to anyone interest in printing their own.
 

Attachments

See less See more
1
#3 ·
Here it is printed. It took longer than I expected because I had to order new filament. I wanted it gray to match the center console and we were out. I printed it using ABS.

I will do a test fit this afternoon and post some pictures.
 

Attachments

#4 ·
You might have a little market for this!
 
#5 ·
There it is installed and showing how a cellphone fits in it.

They really wouldnt be affordable to sell as you could probably buy an entire new center console for what I would charge to print and ship one. However, if anyone wants the stl file to print your own I will email it to you.

It was a 26 hour print on a 3D Wox 2X running on a single head. If you did 2 heads you could probably shave quite a bit off that.
 

Attachments

#6 ·
How did you disconnect the cupholder light from the bottom, or did you just cut the wires? I'm still trying to get the lower section of the floor console out on my '15 so I can put the two pieces together and try to get them to stay together. Nice job on the replacement cupholder.
 
#7 ·
Lol... real jeeps don't have cupholder lights
 
#8 ·
The cupholder light is really just the flashlight on his phone.
 
#9 ·
Yea no cup holder light on a YJ. It broke and I just decided to print a new one rather than buy a new console. A YJ is closer to a tractor than a JK/JL.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top