I bought a soundbar that was just the plastic piece. cheap, no speakers, no nothing. I bought speakers for it, got the wiring setup for it, and am just trying to firgure out which way to do this? I can do like when doing a headliner and just spray adhesive and fabric it, but the top is open, and I am sure i could figure something out, so if it rains at all, and the top is down, it wont mess everything up. looking for suggestions based on that.
Also, It is just a 2 speaker bar, and has room for a dome light. There is no wiring harness, and I have a dome light from my old cherokee. I am, however, debating putting in LED dome light in (one used for campers) as inside lights.
Link with pics from another who did this on there cherokee.
not your normal LED dome lights - Jeep Cherokee Forum
without having a wiring harness made for the sound bar, and wiring this all up myself, where would be the best place to wire this light to? I figure put a switch in, and toggle on and off, for easy, or maybe wire it in to one of those floor lights so I can just roll it on from the dimmer switch?