Transmission/transfer case ? - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ General Discussion Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 01-29-2014, 08:13 AM
Thread Starter
  #1
Jeeper
 
88beast's Avatar
 
Join Date: Jan 2013
Posts: 96
Transmission/transfer case ?

I am pulling out my transmission and transfer case to replace my clutch do you guys know what I should prepare to replace while I have everything out? And I know I need to replace my transmission mount I just want to get the right one

88beast is offline   Quote
Old 01-29-2014, 08:15 AM
Thread Starter
  #2
Jeeper
 
88beast's Avatar
 
Join Date: Jan 2013
Posts: 96
I have AX5 transmission btw

88beast is offline   Quote
Old 01-29-2014, 08:41 AM   #3
Jeeper
 
Mowrangler's Avatar
 
Join Date: Jun 2013
Location: Tampa Fl.
Posts: 1,727
If you have the internal hydraulic throwout bearing I would deffinatly replace that too. It will save you pulling the tranny twice.
__________________
95 YJ 2.5 5 speed 33" Mud Rovers SOA
A frustrating WORK IN PROGRESS
Mowrangler is offline   Quote
Sponsored Links
Advertisement
 
Old 01-29-2014, 08:58 AM
Thread Starter
  #4
Jeeper
 
88beast's Avatar
 
Join Date: Jan 2013
Posts: 96
I'll have to look that up... Doesn't that part come with a clutch kit or is there another one actually in the tranny
88beast is offline   Quote
Old 01-29-2014, 12:32 PM   #5
Jeeper
 
W5KVV's Avatar
 
Join Date: Oct 2013
Location: S.E. Oklahoma
Posts: 824
Do it all while you're in there. Clutch, pressure plate, throwout bearing, pilot bearing & flywheel ( if need be). If your rear main seal is leaking or weeping it would be a good time to change it. I did mine the same time I did the clutch.
__________________
1995 Rio Grande - 4"RC - 1/2"booms - 33's - 4:88's - 1"MML -
Belly up/302/NP435/NP208/8.8 swap about to start
http://i42.photobucket.com/albums/e3...g?t=1411201524
W5KVV is offline   Quote
Old 01-29-2014, 03:11 PM   #6
Jeeper
 
StanF's Avatar
 
Join Date: Jan 2013
Location: Austin, TX
Posts: 1,441
Good suggestions so far...

I'd also replace the front input transmission seal while you have it pulled out. If it starts leaking, it will likely soak the clutch, and cause more expense. (I've just gone through this the last month or so)

And consider getting an external slave setup for your AX5. You'll have to research the details for your age of AX5 - I'm not sure on the details.

BTW, the rear seal will require an oil pan gasket change too.
__________________
1995 YJ, 4.0L, AX15, 3" susp lift; front Dana 44 with Detroit; Rear 8.8 w/ARB; Flat Tummy Tuck, 1" MORE MML; 35" MT/r Tires;

StanF Tummy Tuck, Ford 8.8, Gas Tank Lift, Rocker Guard Fab, Ammo Can Console
StanF is offline   Quote
Old 01-29-2014, 03:49 PM   #7
Jeeper
 
Mowrangler's Avatar
 
Join Date: Jun 2013
Location: Tampa Fl.
Posts: 1,727
If he has an AX-5 he has a 4 cyl arent all the 4 cyls a one piece seal?
I changed my rear seal no need to drop the pan.
__________________
95 YJ 2.5 5 speed 33" Mud Rovers SOA
A frustrating WORK IN PROGRESS
Mowrangler is offline   Quote
Old 01-29-2014, 04:39 PM   #8
Jeeper
 
StanF's Avatar
 
Join Date: Jan 2013
Location: Austin, TX
Posts: 1,441
Quote:
Originally Posted by Mowrangler View Post
If he has an AX-5 he has a 4 cyl arent all the 4 cyls a one piece seal? I changed my rear seal no need to drop the pan.
I was going off memory and could be wrong - a quick search will solve it

__________________
1995 YJ, 4.0L, AX15, 3" susp lift; front Dana 44 with Detroit; Rear 8.8 w/ARB; Flat Tummy Tuck, 1" MORE MML; 35" MT/r Tires;

StanF Tummy Tuck, Ford 8.8, Gas Tank Lift, Rocker Guard Fab, Ammo Can Console
StanF is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 06:20 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, Gladiator, Mopar and Grand Cherokee are copyrighted and trademarked to FCA US LLC.
Wranglerforum.com is not in any way associated with FCA US LLC.