I’ll be posting some pics soon, but here is my build video and a list of mods so far:
2.5” Readylift spacer lift. This is the 4th wrangler I have lifted, and my first with this manufacturer. The kit itself is very complete for $400, including extension brackets for brake lines and even shock extensions. Also the spacers are metal, so you get the true 2.5” front/2” rear that was advertised. Instructions were clear and was the kit that allowed me to experience the Rubicon shocks and retain the stock ride somewhat. Some parts could have been painted better. If anyone is installing this and has questions let me know.
Firestone Destination MT/2 37 x 12.5 R17 on stock Rubicon rims with Synergy 1 5/8” wheel spacers. This is my first time with these tires and running spacers (Ihave run Duratracs, KM2’s, and KO2’s previously). The online tire reviews are awesome, so I figured what the heck. I don’t wheel a ton and do some highway driving, so a mud tire with road manners is important to me. So far these tires are awesome, handling some pretty gnarley rocks in CO and super quiet on the highway. The best part was I got them for a shade over $200 a piece with a 25% discount on purchases over $1000 special Firestone was running.
***By the way, I have pushed the flex on this combo as much as possible, and I have zero rubbing. The narrower 37” tire tucks nicely into the big Rubicon fender wells, and the spacer lift limiting upward spring travel probably helps some too. That 8 speed transmission is a champion with those tires too!
For the full-size spare, I am running a Mopar tailgate hinge reinforcement bracket and Rough Country Spare tire extension mount. This is a pricey combo, but easy install and I like not having to open a spare carrier and tailgate (lazy America, I know). I extended the stock third-brake light bracket, and it clears the tire perfectly. The RC extension advertises being able to run up to a 35” tire, but the 37” clears fine and hugs the Jeep well. It feels solid and no issues running it so far.
I am using my Smittybilt bikini top from my JKUR. To make it work, I had to drill two 1/2” holes that line up with the plastic guide rods the freedom tops sit in, and used 2 bolts, metal spacers, washers, and wing nuts to secure. The top tad narrow at the windshield channel, leaving a small gap between the top of the door, but is super secure all around and keeps the weather off the leather, man! Saved some money on a top, too.
I am modifying a bracket I found in my garage to mount my firestick CB antenna to the hole on the tailgate hinge reinforcement bracket. Looks like it will turn out fine, and I seriously hate the idea of spending $100 on a bracket. Seems like some manufactures are doing a little price-gouging due to high demand and limited options for us at this point.
Doors off I am running a $6 suction mirror from O’Reilly zip-tied to the side vent. This works fairly well and keeps me legal.
VR 8 Winch (sadly/luckily never had to use my last winch on my last Rubicon in 2 years, so went with the cheaper model)
Maximus 3 long Roof rack for RTT, and Hi-Lift bracket for the rack or bumper
Red Rock 4x4 Crawler front stubby bumper
Other than that, even though mods are never done, I will stop there for a bit.
Okay, just kidding lighting for the sides and rear of my rack and front bumper are next, along with RTT and a rear shelf for camping.
Down the road I may do different wheels, but I’ll see how the stock rim/spacer combo goes for a while. I want to keep things tight and narrow to protect the axles a bit and not be too much of a guinea pig on pushing the limits of them.
If anyone has any questions or wants pics of what I have done here, let me know. Thanks for reading; I hope you enjoyed and this helps you decide on what you want (or don’t want) to use to build your Jeep for you.