New Guy here! 1992 YJ w/223k smiles - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Build Forum

Join Wrangler Forum Today


Like Tree2Likes
  • 1 Post By IRQ
  • 1 Post By Tophog
Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 07-21-2017, 09:48 AM
Thread Starter
  #1
Jeeper
 
Join Date: Jul 2017
Posts: 109
New Guy here! 1992 YJ w/223k smiles

Recently, I had a opportunity to buy this 92 wrangler that was in desperate need of some love. I couldn't pass it up, after all, its the same year they used in Jurassic Park.

I had one photo to go by and all I could see were 4 bald tires, rust, and mismatched doors. I asked the guy deliver it to me and he agreed. 2 hours later I saw him pulling in with it. The fool drove it


First thing I did was I roughed up the Doors with some steel wool and sprayed them with some white primer. This is temporary.

Next I took the wheels off and got the brakes working. The brake light was on and the pedal felt soft. So I took them all apart, cleaned everything up and installed all new rotors, pads, drums, shoes, drum hardware, and brake lines.





After that I scrapped down the hard top and gave that a couple coats of Dye. Its not done yet. Don't worry. Cosmetics are preliminary for now as I'm not sure what condition the motor and tranny are in.



Next I went routing around for the rusted frame. I know, I know... Should'a done that first but I did not want to know just yet.



This is the only spot I found. So I sprayed the whole frame with some high quality rubberized coating and called my friend to get the frame patched.

Next I ordered some OEM orginal 2017 Jeep Wrangler wheels and tires. nothing like polishing a turd Of course I got the full set of 5.



Next I did a oil change, coolant flush, and replaced the air filter.
Ordered a set of 5x4.5 to 5x5 wheel adapters for those shiny new wheels. Still waiting for them to come in so stay tuned!


Next up:
Intake and exhaust gaskets
Replace the exhaust system
Replace Plugs and Wires

__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 07-21-2017, 10:16 AM
Thread Starter
  #2
Jeeper
 
Join Date: Jul 2017
Posts: 109
Broken images and the inability to edit the post = Useless thread.

Sorry guys. I tried.

__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 07-22-2017, 11:30 AM
Thread Starter
  #3
Jeeper
 
Join Date: Jul 2017
Posts: 109
test

__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Sponsored Links
Advertisement
 
Old 07-24-2017, 03:17 AM   #4
IRQ
Jeeper
 
IRQ's Avatar
 
Join Date: Dec 2014
Location: NY
Posts: 2,080
Quote:
Originally Posted by Bangler View Post
Broken images and the inability to edit the post = Useless thread.

Sorry guys. I tried.

To attach photos to thread (Wrangler forum method)

1. Go Advanced (under message box)

2. Scroll down to manage attachments (attach files)

3. Another window will open, Choose File, Upload

There are also options such as Dropbox, Imgur, & Google drive.

If you don't see an option to edit it probably has to do with your post count.
__________________
1995 Rio Grande 2.5L AX-5 50,000 miles Stock
IRQ is offline   Quote
Old 07-24-2017, 06:00 AM
Thread Starter
  #5
Jeeper
 
Join Date: Jul 2017
Posts: 109
Quote:
Originally Posted by IRQ View Post
To attach photos to thread (Wrangler forum method)

1. Go Advanced (under message box)

2. Scroll down to manage attachments (attach files)

3. Another window will open, Choose File, Upload

There are also options such as Dropbox, Imgur, & Google drive.

If you don't see an option to edit it probably has to do with your post count.

Thanks for the help IRQ.

Pictures were uploaded via Imgur, using attached files.

I have the ability to edit posts but no pictures are showing up regardless. I'd like to fain ignorance here but I belong to 20+ other forums where I have done build threads on all of them for various cars, projects, and help tutorials.

This is utterly frustrating to say the least.
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 07-24-2017, 02:58 PM   #6
IRQ
Jeeper
 
IRQ's Avatar
 
Join Date: Dec 2014
Location: NY
Posts: 2,080
You know what I found out why Imgur doesn't work:

https://www.wranglerforum.com/f2/imgu...l#post27516033

As far as the editing goes it's a real drag even when you can edit, once a post is made one can only edit it for 24 hours... what keeps me around here are the people.
Bangler likes this.
__________________
1995 Rio Grande 2.5L AX-5 50,000 miles Stock
IRQ is offline   Quote
Old 07-24-2017, 04:40 PM
Thread Starter
  #7
Jeeper
 
Join Date: Jul 2017
Posts: 109
Quote:
Originally Posted by IRQ View Post
snip

Thank you very much IRQ. You have been most helpful!
My goal is to provide more information than I consume on this forum.



I'll get this thread straightened out this week.
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 09-08-2017, 05:52 PM
Thread Starter
  #8
Jeeper
 
Join Date: Jul 2017
Posts: 109
Update* No pictures yet but I'm working on it.

Jeep is in my bay in pieces. Anything removed gets cleaned and painted.

New parts:

Suspension:
Inner & Outter tie-rods (done)
Upper & Lower ball joints (done)
Stabilizer Strut (done)
Sway Bar end links (done)
Rear Shocks (done)
Front Shocks (in progress)
Front Track Bar (on order)
Rear Track Bar (on order)

Exhaust:
Stainless steel Shorty Header (in progress)
Cat delete (in progress)
Borla stainless steel Exhaust system (on order)

Engine:
Plugs (done)
Wires (done)
Cap & Rotor (done)
Distributor (done)
Fuel Filter (in progress)
1000amp battery (done)
Remove & Flush Radiator (done)
Replace Hoses (in progress)

Thinking about rebuilding the motor with new pistons, rings, oil pump, water pump, gaskets, oil pan, rear main seal, etc.

Drivetrain:
2 Front U-Joints (done)
2 Rear U-Joints (in progress)
Diff Covers & Fluid (in progress)

Interior:
Added Six 914 sockets for lighting (done)
Rubberized coating for sound (done)
New Carpeting (on order)
Polished Aluminum shift Knobs (done)
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 09-08-2017, 09:36 PM   #9
Jeeper
 
Tophog's Avatar
 
Join Date: Dec 2012
Location: Between Death Valley and Sin City!
Posts: 418
I use tinypic.com



No problems (yet) with posting pics, although it is owned by photobucket!
willd likes this.
__________________
'90 YJ, 4.2, auto
'93 YJ, 4.0, auto

Moderator - nevadashooters

Custom painters don't screw up . . . they just add more graphics!
Tophog is offline   Quote
Old 09-12-2017, 04:52 PM
Thread Starter
  #10
Jeeper
 
Join Date: Jul 2017
Posts: 109
Update* - After I finish this build, I'll start a new thread with pics all organized nice for the few people who care.


I'll be copying and pasting this as things are added and finished.
Bold items are changes made.

New parts:

Suspension:
Inner & Outter tie-rods (done)
Upper & Lower ball joints (done)
Stabilizer Strut (done)
Sway Bar end links (done)
Front Shocks (in progress)
Rear Shocks (done)
Front Track Bar (on order)
Rear Track Bar (on order)
Alignment (done)

Exhaust:
Stainless steel Shorty Header w/6-1 primary (done)
JBA stainless steel mid pipe Cat delete (on order)
Magnaflow stainless steel Exhaust system (on order)
Power wash Intake (done)
Power wash engine (done)


Engine:
Plugs (done)
Wires (done)
Cap & Rotor (done)
Distributor (done)
Coil Pack (on order)
Fuel Filter (in progress)
1000amp battery (done)
0 gauge wiring (in progress)
Remove & Flush Radiator (done)
New Radiator (on order)
Replace Hoses (on order/in progress)

xxxxxx**Thinking about rebuilding the motor with new pistons, rings, oil pump, water pump, gaskets, oil pan, rear main seal, etc.xxxxx
Motor is fine doesn't need to be rebuilt!

Drivetrain:
2 Front U-Joints (done)
2 Rear U-Joints (in progress)
Diff Covers & Fluid (on order)

Brakes:
Rotors & Pads (done)
Drums & Shoes (done)
E brake Hardware (done)
Brake lines (done)

Interior:
Added Six 914 sockets for lighting (done)
Rubberized coating for sound (done)
New Carpeting (on order)
Polished Aluminum shift Knobs (done)
Install Radio (Needs to be ordered)
Horn (needs to be ordered)
Ignition (Needs to be ordered)
Windshield Wiper arm/controller (needs to be ordered/fixed)

Exterior:
New fenders (done)
New lights (done)
Paint bumper (done)
Rubberize frame (done)
Wheel Spacers (done)
Wheels & Tires (done)
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 09-17-2017, 05:15 PM
Thread Starter
  #11
Jeeper
 
Join Date: Jul 2017
Posts: 109
New parts:

Suspension:
Inner & Outter tie-rods (done)
Upper & Lower ball joints (done)
Stabilizer Strut (done)
Sway Bar end links (done)
Front Shocks (done)
Rear Shocks (done)
Front Track Bar (on order)
Rear Track Bar (on order)
Alignment (done)

Exhaust:
Stainless steel Shorty Header w/6-1 primary (done)
JBA stainless steel mid pipe Cat delete (on order)
Magnaflow stainless steel Exhaust system (Delivered!)
Power wash Intake (done)
Power wash engine (done)


Engine:
Plugs (done)
Wires (done)
Cap & Rotor (done)
Distributor (done)
MSD Ignition Coil (on order)
Fuel Filter (in progress)
1000amp battery (done)
0 gauge wiring (done)
Radiator (done)
Replace Hoses and Clamps (done)
Voltage Regulator (need to order)

**Engine has Fuel, Spark, and Air, but wont fire. Appears to have a voltage issue.


Drivetrain:
2 Front U-Joints (done)
2 Rear U-Joints (in progress)
Diff Covers & Fluid (on order)


Brakes:
Rotors & Pads (done)
Drums & Shoes (done)
E brake Hardware (done)
Brake lines (done)


Interior:
Added Six 914 sockets for lighting (done)
Rubberized coating for sound (done)
New Carpeting (on order)
Polished Aluminum shift Knobs (done)
Install Radio (Needs to be ordered)
Horn (needs to be ordered)
Ignition (Needs to be ordered)
Windshield Wiper arm/controller (needs to be ordered/fixed)


Exterior:
New fenders (done)
New lights (done)
Paint bumper (done)
Rubberize frame (done)
Wheel Spacers (done)
Wheels & Tires (done)
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 09-17-2017, 07:22 PM   #12
Jeeper
 
Pudl Pig's Avatar
 
Join Date: Jun 2015
Location: Bronson Fl
Posts: 123
Hey man , If you don't mind spillin the beans , what kind of rubber spray did you put in the tub for sound because I saw this dude with a willy's and he had sprayed this "rubber" bed liner that as it dried it puffed up like spongy rubber and I can't find that stuff anywhere. I don't want Rhino or any of the hard shell types , I'm huntin for that puffy stuff.
Pudl Pig is offline   Quote
Old 10-02-2017, 05:37 PM   #13
Jeeper
 
willd's Avatar
 
Join Date: Aug 2017
Location: Southern AZ
Posts: 200
Quote:
Originally Posted by Tophog View Post
I use tinypic.com



No problems (yet) with posting pics, although it is owned by photobucket!
Sweet YJ tophog! Looks a lot like mine before all the mods
__________________
1991 Jeep YJ - 4.0/AX15, Ford 8.8 w/ LSD, Aussie in front, 4.11 Gears, 5.5" RE Lift kit, SYE, XRC bumpers front & rear, 33x12.50 KO2's
willd is offline   Quote
Old 10-03-2017, 01:58 PM   #14
Jeeper
 
Tophog's Avatar
 
Join Date: Dec 2012
Location: Between Death Valley and Sin City!
Posts: 418
Quote:
Originally Posted by willd View Post
Sweet YJ tophog! Looks a lot like mine before all the mods
Thanks. I got this one roadworthy after fixing all the PO's screwups, and did some mods . . .



. . . and then 'The Warden' claimed it!

So I got the red one in June. Basically box stock, so I wouldn't have to spend months fixing stuff! And I can do mods my way the first time.
__________________
'90 YJ, 4.2, auto
'93 YJ, 4.0, auto

Moderator - nevadashooters

Custom painters don't screw up . . . they just add more graphics!
Tophog is offline   Quote
Old 10-03-2017, 06:32 PM   #15
Jeeper
 
willd's Avatar
 
Join Date: Aug 2017
Location: Southern AZ
Posts: 200
Quote:
Originally Posted by Tophog View Post
Thanks. I got this one roadworthy after fixing all the PO's screwups, and did some mods . . .



. . . and then 'The Warden' claimed it!

So I got the red one in June. Basically box stock, so I wouldn't have to spend months fixing stuff! And I can do mods my way the first time.
Ooh nice paintjob on the old one! And what do you mean by "The Warden"? I have a feeling thats a nickname for the wife....

And what mods do you have planned for your new one?
__________________
1991 Jeep YJ - 4.0/AX15, Ford 8.8 w/ LSD, Aussie in front, 4.11 Gears, 5.5" RE Lift kit, SYE, XRC bumpers front & rear, 33x12.50 KO2's
willd is offline   Quote
Old 10-03-2017, 07:24 PM   #16
Jeeper
 
Tophog's Avatar
 
Join Date: Dec 2012
Location: Between Death Valley and Sin City!
Posts: 418
Quote:
Originally Posted by willd View Post
Ooh nice paintjob on the old one! And what do you mean by "The Warden"? I have a feeling thats a nickname for the wife....

And what mods do you have planned for your new one?
Yep, my better half!

Here's a close up of the paint job. We call it 'Spots, the wonder Jeep', since it's a wonder I actually fixed the wiring mess. And the wife is into leopard print stuff.



-

The red Jeep is going to be less radical, but I am entertaining the idea of tiger pattern graphics. The 'rips' won't be the same. Maybe paint cracked out, sort of like this, with the tiger print inside:





It helps that I do custom graphics and airbrush for a living!

I'm not gonna do a radical lift this time. I'm in my 60s, and don't feel like doing calesthenics just to get in and out.
__________________
'90 YJ, 4.2, auto
'93 YJ, 4.0, auto

Moderator - nevadashooters

Custom painters don't screw up . . . they just add more graphics!
Tophog is offline   Quote
Old 03-06-2018, 02:21 PM
Thread Starter
  #17
Jeeper
 
Join Date: Jul 2017
Posts: 109
test
moving on to a new forum where I can edit posts at anytime.

Thanks for having me.
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 03-06-2018, 02:30 PM
Thread Starter
  #18
Jeeper
 
Join Date: Jul 2017
Posts: 109
#2 - New Guy Here 92 YJ w/223k Smiles

fdyjdfyj

deleted
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 03-06-2018, 02:44 PM
Thread Starter
  #19
Jeeper
 
Join Date: Jul 2017
Posts: 109
noijo;\


all pictures deleted
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 03-06-2018, 02:59 PM
Thread Starter
  #20
Jeeper
 
Join Date: Jul 2017
Posts: 109
cfyjdyj
__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Old 03-06-2018, 03:16 PM
Thread Starter
  #21
Jeeper
 
Join Date: Jul 2017
Posts: 109
ngjvchgfc

I probably wont update this thread. After the mods merged new thread with old, it looks like shit.

Great people. Terrible forum. Edits are locked unless you ask special permission? This forum seems to be one of few forums that prevent users from editing posts.

Slow load times, way to many ads, = shit forum.

__________________
2008 JK - 3.8L A4 Bone stock grocery getter 55k miles
1992 YJ - 4.0L M5 Lightly Modded Cruiser 225k
2002 FBODY - Garage Queen 17k miles
Bangler is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 05:42 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Jeep, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC