Originally Posted by 15JKUR
I have the 2.5" Game-Changer with Falcon 3.3's and 35" KM2's. The tires are closer to a 33" though. I have zero rubbing at full flex but had to remove the plastic airdam and I believe if I had a full stock bumper it would rub, this is with 4.63" backspacing. I didn't take any before/after measurements.
You must have a sweet setup with those shocks. I like those but need to get new springs (only have spacers) to help hood the weight/keep my height after installing a ARB front bumper. Its bogged down the front end and drives weird, takes off not as fast.
I was interested in numbers for lift height (net), not worried aboiut tire stuff. I have KM2 33s (net is 32.5ish). I had MT classics 4.5 backspace and swapped those for Satas with 5.25 bs and like the tires not sticking out as much past the fenders.
I am trying to keep my hegight (not needing any specific hieght number) and keep the jeep level. Which for my jeep, I have always needed 2 inchs more in front then rear. I currently have 2.5 and .5 spacers and jeep is level. Then, added this ARB and its nosed dived.
So I need springs and good strong ones. I get MC 2.5 (nets me 3.5 in front, right?) and 2.5 in rear. So, I end up with 3.5f.2.5b, then I need add 1inch spacer in front to offset bumper weight. Still not sure how well MC springs will hold my weight, because I need more then 3.5/2.5 to be level.
I will add ARB rear bumper/hardtop at times but you know what I mean.
Trying to figure out how to do this. I email metalcloak to see if they could get me a 1.5 spring for rear today.