Cooltech UltraMount Coax Routing - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > General Jeep Discussions > Communications and Electronics

Join Wrangler Forum Today

Thread Tools

Please support our sponsors and let them know you heard about them on
Old 03-22-2018, 09:50 AM
Thread Starter
Join Date: Feb 2018
Posts: 7
Cooltech UltraMount Coax Routing

Iím about to order the Cooltech UltraMount kit to mount a CB antenna on the JK license plate holder, but Iíd like to know a couple of things first.

1-How does the coax get from inside the plate holder to the inside of the JK? I havenít had the holder apart, so was wondering if there was an easy entry to the inside.

2-How did you route the cable once inside the JK? Iíve got the Midland 75-822, so the cable will need to end up somewhere near the cigarette lighter plug so that I can plug both the power and coax in together.

Thanks in advance.

Sent from my iPhone using Tapatalk

RapidRoy is offline   Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -5. The time now is 11:57 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Jeepģ, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC