2X 48W Spot Square LED Light Bar Driving Fog SUV 4WD UTE Tractor Boat Offroad US
Stud mount :
WORKMAN RV1 CB RADIO ANTENNA SINGLE GROOVE MIRROR MOUNT
40 ft of 12 gauge wiring
40 amp relay with inline fuse 10 amps( if you want to add more lights increase fuse size)
Assuming you have all these then
the next step is to put it together you four locknuts matching the bolt size that come with the lights then one tooth lock washers per bolts on each mirror your only going need to do two bolts so four washers in total. After remove bolts from mirror then place the LED mount ontop of stud the place bolts into the one hole of the mount which will be one of stud holes that mounts with the mirrors then insert the washers then bolt back into the door. Do not bolt all the way, twist the mount sideways bolt the LEDs with the given instructions then once done twist the mount back vertically and bolt it and your done, except for the wiring part which you can figure out yourself if you want to wire it straight through your hood or through footwells or make a hole up to you....