Jeep Wrangler Forum

Jeep Wrangler Forum (https://www.wranglerforum.com/)
-   TJ Tech Forum (https://www.wranglerforum.com/f210/)
-   -   Aluminum wheel center caps? What size are they (https://www.wranglerforum.com/f210/aluminum-wheel-center-caps-what-size-are-they-1884849.html)

dlee 11-08-2016 11:14 AM

Aluminum wheel center caps? What size are they
 
I have a 1998 Wrangler sport with the 15" ravine aluminum wheels, I would like to replace the center caps, eBay seems to have a lot available, but range from 50-60MM, anyone know what size I would need?

My build sheet says Ravine, but pictures look like Gambler rim

Thanks

dlee 11-08-2016 11:19 AM

Picture
 
1 Attachment(s)
Attachment 3324409

Here is a picture

wanab offroad 11-09-2016 12:43 PM

those are gambler's
ill measure tonight and post size, I may have some new ones you can have

Peezi 07-25-2018 06:12 PM

Quote:

Originally Posted by wanab offroad (Post 27971041)
those are gambler's
ill measure tonight and post size, I may have some new ones you can have

Did you ever find those Center Caps? No big deal but if you still have them I would take them, I am looking for 5 for the Gambler wheels for my 98 TJ. Let me know, thanks in advance!

Jerry Bransford 07-25-2018 06:18 PM

What do you measure when you use a ruler that shows mm's or inches? You could measure precisely in inches and then use an inch to mm converter. Surely you can narrow it down to either 50 or 60 mm if you have a simple ruler.

softdown 07-25-2018 06:34 PM

25 mm is 1"
10 mm is a centimeter - cm
2.5 cm is 1"

Harbor Freight sells a good enough mechanical calipers for about $10. The battery operated ones seem to have dead batteries "about half the time" for the casual user.

Couldn't imagine not having decent calipers. Much, much more accurate than a tape measure. Easy to be accurate to a couple thousandth's of an inch.

Bmidbar 07-26-2018 04:17 PM

Quote:

Originally Posted by dlee (Post 27960593)
I have a 1998 Wrangler sport with the 15" ravine aluminum wheels, I would like to replace the center caps, eBay seems to have a lot available, but range from 50-60MM, anyone know what size I would need?

My build sheet says Ravine, but pictures look like Gambler rim

Thanks


For a TJ 55 millimeters, 2.17". The following boolean search on eBay (use the parentheses) will get you all the matches you want - (885PA66,5DY07TAEAB,52090401,52124189,5HT59TRMAA,5 HT59TRMAB). Standard pricing will usually be about $20 for a set of four.

Meantime, any standard ruler or tape measure will be SAE English on one side (measuring in increments of 1/32", standard 1" marker offsets) and metric (measuring in 1mm increments on the other side, standard 1 centimeter market offsets) for the genius recommending SAE to metric conversion. Just measure directly on the metric side of the ruler.


All times are GMT -5. The time now is 02:27 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.