Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of January's Ride of the Month Challenge!
88 yj
1-20 of 21 Results
  1. YJ General Discussion
    I put on my soft top this weekend on my 88 YJ. It works, but it's old, ragged around the edges, the windows are all scratched. It's either original equipment (frame) or OE replacement with a Bestop top with the pointed windows. I was looking into getting some soft 2 part doors, but they all...
  2. YJ General Discussion
    I have an 88 Sahara that has had its original seats replaced. I love the look of them and really want to find some I can install (both front seats and bench) but I haven’t been able to find anything for sale. Any ideas on where to look/replacements that look similar, (the current seats are...
  3. YJ Technical Discussion
    I've searched and searched to no avail, 88 YJ, 4.2 5-Spd, stock, new distributor, ign module, plugs, wires, cap, rotor, coil checked ok, 12v on ign on.. only spark is when stop cranking. Then quick sputter and nothing. Will having the factory ecm w/ out doing the nutter bypass cause this issue...
  4. YJ General Discussion
    Need some help with 88 YJ turn signal diagnosis: Both front amber lights come on with the headlights. Right side Front, rear and dash indicator blink properly. Left side Only the rear blinks. Left front does not blink, and dash indicator does not light up at all. Any suggestions? Thanks!
  5. YJ Technical Discussion
    I've seen several threads on here about people having trouble with YJs with larger tires losing acceleration at higher speeds. Mine tops out at about 60 MPH in 5th gear, which is kinda scary if I have to get on the interstate going to work. I think at least part of the issue is I have 31"...
  6. YJ Build Forum
    I needed some room for my new boom shackles, and the old uhaul hitch was restricting movement. First I was just going to take it off and and put the old bumper back on... than I got a little crazy and decided to fab a new! Removal C-Channel, receiver hitch, bottom bracer First tube 1/8"...
  7. YJ Technical Discussion
    So i got it from ebay and noticednthe fine print said this, "FREQUENTLY ASKED QUESTION: My 2.5L plastic valve cover bolt holes do not line up with the cylinder head. What should I do? Do to the thermal dynamic nature of plastics the covers might have some natural deflection when they are...
  8. YJ Technical Discussion
    Hey guys - I'm really sorry if there is a thread for this already. I did do a search but it didn't show what I'm talking about (or what I think I'm talking about anyway). My lil 88 wrangler was setup for this guys daughter and she's like 5' nothing.. I'm 6'2 and the seat was jammed ALL THE WAY...
  9. YJ Technical Discussion
    Considering swapping my ba10/5 in the near future, it works perfectly fine right now, but I'm Leary of off-roading or putting larger tires with it as I have heard it is very weak, opinions??? Advice??? Things to look out for??? I'm new to jeeps so there is no useless info to me! Thanks Yall! -Adam
  10. YJ Technical Discussion
    I have a few issues to deal with on my front end. I know my tie rods are worn do I need to replace the entire tie rod or just the end. also the stabilizer is worn do i need to re place the shock or the entire stabilizer bar. There is a little bit of slop when turning the steering wheel about 10...
  11. YJ Technical Discussion
    So the Jeep has been running fine I go inside the grocery store and I come back it won't start it just cranks and cranks but doesn't turn over. Luckily I was parked in front of auto parts store and the guy behind the counter was super nice he let me take a bunch of parts and try them out. Long...
  12. Classifieds Archive
    Hey everyone, as the title states, I have a 1988 Wrangler YJ for sale. I am located in Wrightsville, PA, which is about 20 minutes from York or Lancster. Now, onto the jeep: As stated, it's definitely a fixer-upper. I purchased it about a year and a half ago, and just have not had the time...
1-20 of 21 Results
Top