Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
blower switch
1-5 of 5 Results
  1. TJ Tech Forum
    This is a not so quick write-up of my experience to correct the infamous melted blower motor speed switch. The central theme here is the quality (or lack there of) in any available 3-position switch replacement. No matter if it's labeled OMIX, Doorman, Duralast, etc., this 3-position rotary...
  2. TJ Tech Forum
    Why can't this happen in May?! I can no longer turn on the blower for the heat. It seems to have lost the detents; switch just whirls from low fan to high position without locking in. And none of the positions activate the blower, not even the high. Brrrr!:eek: I checked the simple stuff...
  3. TJ General Discussion Forum
    I was wondering if anyone has switched from the sliding controls to the knob controls in 98. I was thinking about doing this if i find the part.
  4. TJ Tech Forum
    I have a 2000 Jeep Wrangler. I have checked the fuses, changed the resistor and the blower motor, and still nothing is blowing out on all for settings. I am wondering if I have a short somewhere or if I just change out the blower motor control switch. Do I also need to change the control unit or...
  5. TJ General Discussion Forum
    I am sure a lot of you have seen or heard of this article from JP magazine about fixing an overheated blower/heater switch with relays: Jeep Fire Prevention - Jp Magazine Some of you smart ones were able to fill in the blanks left by the article, the rest of us were left scratching our heads...
1-5 of 5 Results