Jeep Wrangler Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 27 Results
  1. JK Technical Discussion
    Installing my new head unit yesterday, I realized that I’m missing both these bolts, on both sides of the Jeep. (Not my photo, but illustrates it perfectly) Can anyone tell me what size these are / if there’s any specific torque spec to them? Have found a ton of threads about people dropping...
  2. TJ General Discussion
    Just picked up a 04 TJ SE with a hard top. Has it's issues. Trying to fix it up and sell it for a small profit. Anyway, the hard top doesn't have the proper nuts/bolts, So I ordered a new kit of 6 to replace them. Unfortunately, one of the non-OEM nuts is stuck on the bolt under the body (if...
  3. JK Technical Discussion
    I need to replace the factory bolts in my JK tailgate door hinges with longer bolts that came with my JK tailgate Rotopax mount kit. When I remove the factory bolts the metal plate inside the door (that the bolts screw into) slides down 1/2 inch. It's easy to lift this back into alignment with...
  4. TJ Technical Discussion
    Anybody around the southern Maryland area that would be able to help me with some broken upper rear shock bolts. Was putting a lift kit on and 3 of the 4 rear bolts broke. I would be willing to pay for some help.
  5. YJ Technical Discussion
    Does anyone have a good resource for hardware sizes on YJ's? Been all over the internet and can't find the bolt size for the 4 bolts that hold on the plastic front frame cover. Would also like to know the size of the bumper bolts for sure, most forums claim 1/2-13. Replacing the previous owners...
  6. TJ General Discussion
    I had a 300 mile drive today and currently only have my drivers seat in my jeep as I've been working on my interior recently, more to the point I was trying to think of a way to have a quick release system to easily remove and then put back in the front seats. I have got nothing on it I was...
  7. TJ Technical Discussion
    Hello all, I recently acquired a 2004 Jeep Wrangler from my brother after he bought a new vehicle. One of the main things that I wanted to get on a Jeep if I ever got one was a nice sounding exhaust. I ended up purchasing the Banks Monster Exhaust system. Today (Monday) my dad and I were...
  8. YJ Technical Discussion
    Hi All, I have a 1992 YJ 2.5L 4-cylinder wrangler, I took the cylinder head off to have it rebuilt and now I want to buy some new cylinder head bolts. I went to O'reilly's today and the guy behind the counter helped me look online for some and found that they have been discontinued. I don't...
  9. General Jeep Discussion
    Hi, I have a 2-dr, 2014 sport. I'm putting on some sidebars and having trouble finding the bolt size which screws into the bottom. Would anyone be able to tell me the bolt size and where I can get them. Thanks - Eric
  10. YJ Technical Discussion
    I'm getting ready to replace the exhaust manifold mounting nuts and bolts on my 2.5 and while I have the torque specs and rotation order to tighten, I want to be sure I don't miss anything that I should be aware of. Also, with the replacements came 2 nylon or Teflon gaskets (look like plumbing...
  11. JK Technical Discussion
    I cannot find a replacement part for this little cheap plastic piece on my front door, driver's side. The quickest way to show you what part I am talking is to link you to an album I just uploaded: Imgur: The most awesome images on the Internet There are several numbers on the back of it, but...
  12. TJ General Discussion
    I am working on taking the catalytic converter out of my 2006 Jeep Wrangler TJ SE (2.4L) and got the top bolts out, but am struggling a lot with the back two bolts. Anybody have advice on how to get these out because I am about ready to give up on it. I attached a picture to clarify which bolts...
  13. TJ Technical Discussion
    Hey guys, Got any recommendations on specific socket sizes for swapping out a starter on a 98 TJ? The few sockets I had around the house didn't fit, going to buy a complete set later. If anyone has any steps (for swapping out) and of rec's for sockets, they'd be willing to share, I'm totally...
  14. JK General Discussion
    Last week I installed a new Mishimoto radiator after having cracked the stock one. I'm very pleased with the outcome but I do have a few questions. In the instructions video, they state to remove all the rubber cowling that surrounds the old radiator but it never states to put it back on. Am...
  15. JK Technical Discussion
    I lent my 2010 Unlimited to my son. He removed the roof panels over the driver and passenger and was doing some 4 wheeling. While driving, two nuts and one bolt literally fell on him from "somewhere." Presumably, there is a second bolt floating around somewhere, but so far I haven't been able...
  16. TJ Technical Discussion
    All of the star bolts holding my tailgate hinges are stripped so I tried to drill them out and use an extractor but I broke off two extractors. Now the bolt is too hard to even drill through with the hardened extractor broke off in it. Lesson learned. How would a professional get this out?
  17. TJ Technical Discussion
    Well I was stuck in a mud hole this weekend for a whole night, not me but my jeep. It wasnt fun but when I came back to winch it out the next morning some other jeeper mechanics told me I needed to change out my fluids. I have a 4 inch lift with 2 inch body lift so the water wasnt to my engine...
  18. TJ Technical Discussion
    I broke all 4 of the bolts when I went to install the new Bilstein 5100 shocks I got. I was planning on just welding a new bolt facing down on the plate and leave the old broken bolts on top. But I'm seeing a lot fo people saying that it is just as easy to take the body bolts off and lift the...
  19. YJ Technical Discussion
    Not long after getting my 92 yj a found a 2 piece hardtop for sale on craigslist and picked it up for 60 bucks. The guy I bought it from said that it came off a 94 yj so Im assuming that it will fit on mine. I've had it on once and it had the usual wind noise coming from the windshield which...
1-19 of 27 Results
Top