Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
bushings
1-17 of 23 Results
  1. YJ Tech Forum
    89 YJ 2. 5" lift 6 cylinder 5 Speed. I have owned this jeep for 10 years. It has developed a loud groan/ creak when i turn on uneven surfaces.Seems to be in the vicinity of the rear springs. It is worse when I back up and turn onto an incline. Sounds to me like a very dry bushing but I...
  2. JK General Discussion Forum
    Hi everyone! I replaced my door bushings with Delrin bushings from Quadratec. They fit for the stock full doors but don't work with the tube doors. I contacted Quadratec and they said they do not carry any door bushings that would work with full factory doors AND tube doors. This was...
  3. YJ Tech Forum
    Hi everyone, new to forum here... I have a 93 that has, what I think is, a 2.5in lift installed and I'm unsure of what brand the springs are I think skyjacker. It was on the Jeep when I bought it. This thing rides like the frame is bolted to the axles.. I know that leafs don't ride like a...
  4. TJ Tech Forum
    I have a 1997 Jeep Wrangler Sport. It has the original seats, in great shape, in it still. The one problem I am having is that there is a rubber bushing for the rail slides that has degraded and broken off. I know that's where the rattle is coming from, but haven't been able to either find a...
  5. TJ Tech Forum
    hi everyone my TJ is making a groaning/grunting sound from the front end when i go ever speed bumps. I've read that it could be from the bushings not being lubed up? I'm wondering if anyone has experienced this.
  6. JK General Discussion Forum
    Howdy all – new to the forum. Currently driving a 2008 JK with about 110k miles. I’m starting to run into the “little problems” which occur in a vehicle with this age and mileage – plastic bushing holding the transfer case shift cable connected to the transfer case breaking, plastic bushing...
  7. Rancho Suspension
    We have launched our NEW adjustable control arms (upper and lower) with our new D2 rebuildable, self-centering bushings. These bushings will help reduce noise, vibrations and improve handling. Made with heavy duty DOM , they will hold up to the abuse you throw at them! They are now available...
  8. TJ Tech Forum
    I have a quick question, so I need to replace the boots/ bushings at both ends of my drag link. I have found that they are both shot, and that I'm able to push the draglink back and forth. I believe this is the solution to my severe death wobble, So my question is, can i just by any boot for the...
  9. Rancho Suspension
    Often times the bushing on the front axle will wear out over time, this simple upgrade will help restore a nice ride! Available from your favorite retailer. :drinks:
  10. TJ Tech Forum
    I have 03 TJ with a 6 inch skyjacker lift on it. How can I tell if I need new control arms or just new bushings? Does anyone know where I could get rubber bushings and do they have to be skyjacker brand to work?
  11. TJ Tech Forum
    I have worn out control arm bushings on my 05 TJ. I have a 2.5" suspension lift, metalcloak adj track bar. Axel is centered, but could do with a pinion angle correction (right now at 6' so not very far off of 7'). Main concern is the control arms, causing some wobble... not fun... I can get a...
  12. TJ Tech Forum
    Hello! So, I recently noticed the bushings on my rear lower control arm and track bar need to be replaced. As well as the rusty bolts. Seeing as this is my first time doing this :dance: I wanted to make sure I was picking the correct parts. As far as the track bar goes, I was looking at this...
  13. TJ General Discussion Forum
    So thanks to all of you guys :thumb: I've got a pretty good idea of what i'm going to put into my jeep. I believe my first step is going to be to replace all of the bushings, control arm bushings, sway bar bushings, and any other bushings really. I've done some research but I can't seem to find...
  14. TJ Tech Forum
    I'm pretty sure my '98 Sahara still has all original suspension bushings. Every time I crawl under it (which is often), I see another one cracked & deteriorating. I don't think I've seen a new-looking one yet. I'm used to the various rattles and truck-like handling. I don't expect it to drive...
  15. TJ General Discussion Forum
    I need to replace the bushings in my lower control arms. My 97 Jeep TJ has a 4" lift kit and the control arms are clearly not the factory originals. I bought the jeep with this lift kit in it and I don't know the manufacturer. Are bushing sizes generic enough in these lift kits that I can get...
  16. TJ General Discussion Forum
    Desperately need two (2) sets Rubicon Express Super-Ride SR2 Large Builder Bushing Kits, SKU RUB-RE3765. If you have any; know where they may be found; or can suggest an alternative, PLEASE reply. Thanks!
  17. TJ General Discussion Forum
    My rear sway bar's bushings are about to rot completely off. I have a new set of poly ones but I can't seem to get the torx bolt off the new lift's mounting bracket on the axle. Does anyone know what size it is? The main reason I'm doing this is because I still have some drive line vibration...
1-17 of 23 Results
Top