Jeep Wrangler Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. TJ Technical Discussion
    2004 Sahara Stock Suspension 31"x10.5" Tires on 15" Rims 3.73 Dana 30 Front Axle Salvage Title I'm installing a Zone 4" suspension lift. I get to the the front end portion and notice my right side lower control arm bracket is bent. No big deal, found replacements from Rubicon Express for $50...
  2. JK Technical Discussion
    I have a 2008 2 door, automatic transmission. About 3 weeks ago the etc light started coming on sporadically. I took it to the dealer and after two separate weekends they decided that it was the pedal sensor and had to order an entirely new pedal assembly. It cost me $420 and two hours later the...
  3. TJ Technical Discussion
    does anyone know the manufacturer and model # of the IAC valve plug for a 2001 wrangler 4.0? thanks, nick
  4. TJ Technical Discussion
    So in the wonderful Texas weather we have been having, people have been wrecking in the snow and ice. The other day as I was driving , the car in front of me slid on an ice patch, and in order for me to avoid wrecking into him, I swerved over the curb. In the process I broke my front lower...
  5. JK Technical Discussion
    I just recently purchased a 2008 wrangler unlimited 4dr. It has 6" lift with 38x15.50x20 toyo mts. When it is off the steering wheel has lots of play in it from left to right. When turning it with the jeep off nothing underneath seems loose. The jeep has factory control arms and they are maxed...
  6. TJ Technical Discussion
    About 6 months ago I purchased a 2000 TJ Sport that had a leaking heater core (among other problems). Over the holiday weekend I decided to replace the heater core (and A/C evaporator since I was in there already); what a fun way to start the New Year. On Saturday, after putting everything back...
  7. JK Technical Discussion
    Ok so we added a 3.5" Rough Country lift to our 2015 Sahara Unlimited and it was fine, a few weeks later we took off the stock rims and tires and added 35" Toyo mud tires and 18" Fuel Rims (18" were also stock on this Jeep). Now I feel way to much play in my steering, and if I hit a bump while...
  8. YJ Technical Discussion
    Hi! Thank your for reading... My 94 Jeep YJ has a heater that is not working! I feel heat coming from the duct, but there nothing blowing. I'm not sure if it's the heater control panel, the blower motor, or whatever else it could be. I've taken it out of the dash and disconnected a few things...
  9. TJ General Discussion
    Okay so a week or two ago me and my friend went fishing on his land and I took my Jeep. There was a dirt wall that I was climbing for fun before we left and after a couple times of climbing it I came over the top and locked right onto a stump that I couldn't see because my hood was almost...
  10. General Jeep Discussion
    Hey guys, Im about to go off roading in my new jeep for the first time, and i cant wait! however, this is my first time ever going with a stick shift. Any tips on the best ways to off road/keep control with a stick? what do i do when i go up and down hills? and also, when should i use the...
  11. TJ General Discussion
    So basically when i make a right turn (or at least thats when i felt it two times) and while I go over a bump or something it feeeels like the back is slipping out but im not sure if it is or not. then i turn left a little to correct it and it seems to help. Any ideas on this? I have 31 by...
  12. TJ Technical Discussion
    I went to go and my TJ aligned this morning after having some steering issues with a dead spot. I performed the Durango swap and that helped the issue but did not solve it. The shop that I took it to said that they can not align my TJ because the rear control arm bushings were shot. I had a...
  13. YJ Technical Discussion
    Removed the IAC valve from my brother's 88 2.5 last night. Took it apart and noticed it had a broken spring in it. I guess he will be purchasing a new one in the near future. I have never seen an IAC valve like this before. The thing basically has 3 gears inside it that turn the screw type...
  14. TJ Technical Discussion
    I have recently bought the stock control arms from my friends jeep. Im replacing them because the bushings in mine are dry rotted and he just replaced his with new bushings. I need to buy new bolts because im afraid when i take mine off they might snap. I have no idea what bolts to get and was...
1-14 of 14 Results
Top