Search Results for ‘death wobble’

Hello everyone, I have a 2013 JK that I recently installed the Teraflex HD tie rod and drag link kit on. I also installed Energy Suspension track bar bushings on the stock trackbar. Other than these upgrades the Jeep is stock. They were starting to wear and I plan on a lift/wheels soon so I...

Hey all, I was hoping some of you who have experienced death wobble or other issues could give me some tips. I have a 2007 Rubicon, mostly stock except the wheels/tires. I was experiencing death wobble and brought my jeep to a 4x4 shop. For $1,300 :blackeye: they replaced the upper and lower...

Hi, new here, beginner with lifting things. So I'll start here... I owe too much money on my Jeep to use it offroad currently so I've built a bit of a mall crawler. With that in mind I didn't want to go super expensive with the lift and we had used the Rough Country 3.25" lift where I work...

I have had the death wobble for about a month now and I took my jeep into the dealership to see what the issue was causing it, they said that I needed a better steering stabilizer. I also followed up with someone else to make sure that it truly was just my steering stabilizer and they agreed...

I'm new to the forum and just bought a 2005 Wrangler that has a 6" lift kit on it. I had not heard of the DW until I started having troubles. I have had it worked on twice, aligned and parts changed....nothing really helped.Can anyone tell me if I remove the lift kit and change the tires, will...

Afternoon folks, I have had upper/lower ball joints, uper/lower control arms, new cam bolts, front heavy duty steering stabilizer, tie rod end, track bar, and new springs and shocks put on my 2004 Jeep TJ Rubicon (114,000 miles, 5 speed). This solved the death wobble for 3,000+...

Hey, I am having major vibration when i go over 65 mph. The vibration starts at exactly 65 mpg. It's not death wobble, but just strong vibration. I'm getting the idea it could be bad ball joints on my sway bar.. What are your thoughts on that.. Any other suggestions, maybe bad u joints?

Hello everybody! I know this is something that has been asked before and I don't mean to beat on a dead horse (Sorry in advance) My track bar has some play on the passenger side and I don't have a flag nut and cannot for the life of me find any tool that will reach the nut. I have bought this...

Hey y'all, so I recently started to experience DW. My jku is currently in the shop, I'm getting Ball joints and shocks with a FOX ATS stabilizer. Now I was quoted around $1,500 guy said he was going throw an alignment as well. Is that a fair price or not?

Ok. So I adjusted my caster to about 5 on the drivers side and then messed with my toe a little then preceded to drive. Starts shaking like a maniac. Head back home and my front passenger shock is off the bottom mount. So I found some new bolts and fix it back and drove it and now it's fine...

Anytime you lift a JK the front steering should be addressed. With our heavy duty front track bar bracket it replaces the flimsy stock bracket. It gets the front stabilizer up and out of the way. This bracket restores the proper steering geometry and protects many of the front steering parts...

Is this for lifted jk's or does it happen to stock ones too ? Do i have to replace a bolt now??

So here it goes… I’ve owned, driven, built, and loved Jeeps since my first ride when I was a kid. Most of what I know, I learned while pulling apart and repairing or building my Jeeps. 1997 Jeep YJ was my first, 1995 YJ was my second, I restored a 1977 CJ7 over the course of a year or so, my...

Hello, I have a 2009 JK Unlimited X, I have 32" tires without a lift, and no other mods. Jeep mostly used for highway driving with very occasional off-roading during the summer months. I just had the ball joints replaced by a mechanic due to the death wobble, which fixed it, but was also told...

Hello all, newer jeep owner. 2000 TJ , I wanted to replace my front end track bar, due to the ole death wobble I experienced. I bought a new one and I'm not sure what I'm missing here, this doesn't seem to be a standard track bar. Can anyone help?

Sorry if this has been answered, I just didn't see it anywhere. I have a 3" lift on my JKU Rubicon and I'm running 35 tires. About a month ago I bent up my steering components pretty good and decided to modify to the Teraflex chromoly tie rod & drag, HD ball joints, flex control arms and HD...

Hey everyone, I'm riding on a 4" lift and I've been getting those violent vibration when i reach around 60mph. I've had the death wobble, and I took it too the shop and had them replace my ball joints and track bar. Problem solved (for now). Now I have this annoying/loud vibration when I reach...

Sorry I know I know I've must of read 100 pages but nothing has helped my situation. 2015 jeep jk 2 doors 6 speed manual sport, 9k miles on it. I just installed teraflex 2.5 bb an shock adapters an 17x8 rims 4.5 bs. everything was good. torqued everting to spec nothing lose had a wheel...