Jeep Wrangler Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. JK Technical Discussion
    I recently found oil in my coolant but no coolant in my oil (yet) so my best guess is that it’s a blown head gasket. With having 190,000 miles on her I think it’s wiser to replace the engine instead of just the head so I have one on order. I’m going to drive Daisy until the engine arrives so I...
  2. JK General Discussion
    Took off doors and put them back on. Now that door bolts aren’t flush. Is this normal? They’re tight but there is a few millimeter gap between them and the hinge. What did I do wrong?
  3. TJ Technical Discussion
    Hi All, I have searched YouTube and the forums, but haven't found a solid recommendation to fix my driver's side door alignment issue. The bottom right corner does not close flush against the body. If I push on it to try to make it flush, it does not move in at all. I see recommendation to...
  4. JK Technical Discussion
    I have a 2013 Wrangler w/ 30k miles and read about the possibility of debris in radiator fluid. I checked and there was... So I ran water through it until it ran clear. Jeep still ran fine and didn't overheat. After being reviewing the HOAT / OAT issues, I decided to take to the dealer for a...
  5. YJ General Discussion
    Hello everyone, brand new user here. I've been stalking the forums for a while since my dad and I are preparing to try and start his 89 YJ that has been sitting in the garage for 7 years. It has a 4.2L engine WITH a Mopar MPI Fuel Injection conversion. We already know what we have to do for the...
  6. TJ Technical Discussion
    Sorry this will be a little long. 2003 Wrangler ran hot Friday on my way home. Pulled over and turned off for about 10 minutes. Saw no signs of smoke or steam and hood did not feel overly hot. Started back up and gauge pegged again but then fell back to normal. Drove home about 5 min away and...
  7. TJ General Discussion
    Hey guys, If you saw my last know that I'm installing louver soon, but I' still waiting for it to get here, and still deciding on paint. my next project is going to be flush mounted tail lights, and im not talking about the round ones that everyone has. I know some people can get creative...
  8. TJ Technical Discussion
    I've got a question for those who have heat only in their TJ and don't have A/C. How well does your heater work? Mine not so well. It blows a fair amount of air, but it's only warm, not HOT like every other vehicle I've had. I've read that a lot of Jeeps will run you out, but I wonder if that's...
  9. TJ Technical Discussion
    2002 Wrangler did a flush and fill and replaced the hoses today - used the Prestone Kit (on the hose I replaced, then changed it out afterwards). Essentially did this (great post, BTW): http://www.wranglerforum.com/f5/home-coolant-flush-report-122827.html Here's the question - the coolant...
1-9 of 9 Results
Top