Jeep Wrangler Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 96 Results
  1. TJ Technical Discussion
    I'm looking at a jeep that might otherwise be exactly what I've been looking for, but it's a 6 hour drive away, so I want to know if it's worth it to go or if this is a crack in an otherwise perfect frame. I am uploading the same picture twice, just in one of the shots, I've circled what I'm...
  2. TJ General Discussion
    Recently purchased an 02 I6 manual. The frame, front to back has been heavily repaired due to rust. Im basically wanting to know if there will be complications down the road I should consider. Whoever did the repair didn’t do a bad job at all, just unsure if I should worry about squareness or...
  3. TJ Technical Discussion
    I really wanted a MIG welder as all my previous welding experience is on on of those. However, I only have access to 110v and a 110v MIG welder is probably not man enough to deal with a frame. I will also be welding outdoors so the wind/gas situation would not be ideal. So, I think I'll just...
  4. JL General Discussion
    For a long time I actually thought that the rock sliders protected the frame beams. However, I just learned that they actually protect only the body, not the frame. Furthermore, the skid plates don't offer the frame any protection either and almost all of the frame exposed. When off-roading...
  5. Classifieds Archive
    Good afternoon all! I currently have a YJ that needs, at the very least, a body but a decent non-patchwork frame wouldn’t hurt either so if anyone is in/near the New England area, please let me know. I added CJ7 to the title because I’m open to dropping my engine/drive train into one as well...
  6. JK General Discussion
    I'm new to the forum but I tired searching and couldn't find any tangible results. Both sides of my front frame rail ends are starting to rust. The drivers side is completley rusted where the sway bar connects. Its putting a lot of stress on the passanger side so, ill remove the swaybar...
  7. JK Technical Discussion
    I'm new to the forum but I tired searching and couldn't find any tangible results. Both sides of my front frame rail ends are starting to rust. The drivers side is completley rusted where the sway bar connects. Its putting a lot of stress on the passanger side so, ill remove the swaybar...
  8. YJ Build Forum
    Greetings from a small mediterranean country - Montenegro. I have 1995. Wrangler with 4.0 engine and 32rh auto transmission. I have it since 2012. After going thru hassle with all sorts of issues, shops etc. I have finally decided to do a complete rebuild on my own. Jeep was not a rust bucket...
  9. JK General Discussion
    Took my new 2018 JK to the dealership to get the leaks looked at. I primarily wanted them to replace all the seals, since they seemed so worn for a new Jeep and I want to milk the 3 year warranty. They called me and said they replaced the seals, but the leak is still happened. They said they...
  10. JK General Discussion
    Alright. I've been having leaks in my 2018 JK 2 door. First I took it to the dealership - I knew they probably couldn't solve the issue, but I thought I would exhaust this option before trying to fix it myself, since it is so new. They ended up replacing the seals around the doors. This did...
  11. TJ General Discussion
    Hello, I was hoping someone on this list could make a recommendation in the Miami, FL area for a reputable body shop to help me with my Jeep Wrangler as I try to keep the frame as rust free as possible. It is a 1997 jeep wrangler with light surface rust on some parts of the frame. So, i would...
  12. TJ Technical Discussion
    Hello, I was hoping someone on this list could make a recommendation in the Miami, FL area for a reputable body shop to help me with my Jeep Wrangler as I try to keep the frame as rust free as possible. It is a 1997 jeep wrangler with light surface rust on some parts of the frame. So, i...
  13. Before

    This was taken at a Wicked Jeep meet up before we had the frame welded.
  14. TJ General Discussion
    So I have a 2001 Jeep Wrangler TJ which I like very much. About a week ago I had trouble steering and when I looked at the bottom of the car I noticed the rusting frame near the wheel. I have attached a picture of the damage but I wanted to know if any of y'all have had this issue? Would this...
  15. Tennessee Jeep Forum
    I have a 2000 Wrangler that has some rust on the body (and a little on the frame) around the mounts. Probably needs new floor pans and frame channels. Anybody know of a body shop around Knoxville that will do this kind of work? I have called a dozen places and can't find anybody willing to...
  16. TJ Technical Discussion
    Okay, so I am new to the Jeep world and I bought a 98 TJ a couple months ago, ROOKIE! Took it to my buddy's shop this week to have him look it over, the only obvious issues to me was the not being able to put much gas in it and the gauges on the dash didn't work. The gauge wiring harness is not...
  17. TJ Technical Discussion
    Hi, I've bought a used 1999 Jeep Wrangler Sahara Edition for my first car. The car works great except for its frame (and one flat tire I haven't replaced yet). The frame is entirely rusted and has bits chained together. Does anyone know how much a full frame replacement would cost? Would I need...
  18. TJ Technical Discussion
    Sorry if I've missed some relevant posts , but I did a search and all the stuff was old. Does anyone know of a good reliable Jeep shop in the greater Atlanta area who does frame restoration work? I recently acquired a 2001 TJ with a purring engine. I want to restore it, but the key issues are...
  19. TJ General Discussion
    The bottom frame of my windshield frame has rusted out. All the damage is on the "inside" and not on the part of the frame that directly comes in contact with the glass. I have attempted to post some pics of the situation. Looking for a fix without buying a completely new frame. Question: Do...
1-19 of 96 Results
Top