Jeep Wrangler Forum banner
power steering pump
1-8 of 8 Results
  1. YJ Tech Forum
    I just replaced the bracket connected to the power steering pump along with the belts. Now I can’t get the belt to tighten on the power steering. I can pivot the bracket from end to end but I don’t get sufficient tension. For the hell of it I decided to pivot to the point with the most tension...
  2. YJ Tech Forum
    Im sharing this post for informational purposes but if anyone has insight/advice/feedback, I’m listening. Background: I had a broken power steering pump bracket for a while now. It’s been that way since I got my Jeep a little over a year ago. Everything seemed fine despite the clear break...
  3. TJ Tech Forum
    Hi everyone, I have a 2003 TJ 4.0. I was teaching my wife how to drive a manual trans yesterday, which might have been a mistake. She pulled into our driveway and cut the wheel HARD to park. There was an instant cloud of smoke from underneath the front end, and just turning the wheel to...
  4. JK Tech Forum
    Hi, I have been working on my son's 2012 JK that the power steering went out on a few months ago after being stuck. He was rocking it and turning the wheel to get unstuck and thats when it stopped working. There was no fluid loss and no noise from the pump. We installed a new and he drove it...
  5. TJ Tech Forum
    I have a 98tj that I bought an AGR super box2 and a tc aftermarket super pump. Everything was going smooth on the replacement until I went to install the pump. On the new pump, the bolt nearest the top and midline of the jeep won't line up correctly. On the old pump the mounting holes line up...
  6. TJ Tech Forum
    I just got a new steering box, power steering pump and lines for my 97 wrangler 4.0. I went and got absolutely everything new including the reservoir. Well i got everything all together and on my jeep, and put fluid in to start the bleeding process. Thats when it started to leak from the...
  7. YJ Tech Forum
    Hi, When I turn the steering wheel the engine rises RPM.In 4X4 in VERY slow speed when turning more than 90deg the driving wheel becomes somehow loose and unresponsive.When making a full turn there's a rattling noise from the Power steering pump , so I think stat first with changing it. I...
  8. YJ Tech Forum
    I have been having a nasty squeak in my serpentine belt for a month or so. I replaced the water pump after I found the drive shaft was loose. Had the alternator tested and it didn't squeak, but was weak so I replaced that. I don't have a/c, so I came down to the power steering pump. I...
1-8 of 8 Results
Top