Jeep Wrangler Forum banner
rubbing
1-20 of 20 Results
  1. JK Tech Forum
    14 JK 2door, stock brakes, Strange grinding noise coming from drivers rear at low speeds, pulled the rotor and I think it’s parking brake shoes grinding on the rotor intermittently- there’s a lot of slop on the shoes, I can move them side to side a good amount. Can’t adjust the brake in any way...
  2. JK Tech Forum
    Hello, I have recently purchased a 2014 Jeep Wrangler JKU Canyonland land Edition (I belive it is a from an offroad park in Utah). I am running 285 75 r17 on what I belive to be 2019 Rubicon factory take offs wheels, and at full turn the tires are rubbing the gas chamber of the shocks. I took a...
  3. JK Tech Forum
    Howdy all, I have a specific question about tire fitment I wasn’t able to find scrolling through existing threads. Despite being told by everyone up until now that you can run 35s on a factory stock 2018 Rubicon JKU, I was just told today that they’ll rub on the inside of the front bumper when...
  4. JK General Discussion Forum
    Hi guys! I am about to order a lift kit for my JK. I settled down for the Krawl Off road that includes everything you need for 2.5 inches but I am wondering about spacers. I will run either 285/75r17 or 35x11.5r17 AT3s and I was told I am going to have just a little bit of rubbing so I am...
  5. JK Tech Forum
    Before you say "You ordered these tires and you don't know?", let me give a little backdrop. First Jeep ever. Had about 2 yrs and original tires are getting low on tread. I've tried to research this exhaustively, asked some questions on the forums, but I'm now needing the experts advice for...
  6. JK Tech Forum
    So I have a clunk coming from the front passenger side. I noticed after installing some new rock sliders. Not saying this caused it but I guess I was paying extra attention to any noises. I crawled around for several days trying to locate the problem. I even removed the 4 body mount bolts...
  7. JK General Discussion Forum
    Just bought some 285/75/16 BF Goodrich T/A KO2's for my stock 08 Wrangler X 2dr. I saw on here that you can mount 285's on regular stock rims (16X7") even though the sizing for 285's is 16X7.5". People on here said that the center of the tire would wear down quicker due to minor over-inflation...
  8. Tires & Wheels
    So over the past couple of weeks I've been researching what tires and rims I'd like to use to replace my stock setup. I have a Black 2008 Jeep Wrangler X/Sport (S-Package technically, I think). I really want to go for that "squatting" look where the tires are sticking out from the fenders...
  9. TJ Tech Forum
    So I went wheeling out in Crowley, Texas and I decided to disconnect both sway bars links. When I did that, the whole sway bar kinda just drooped. I didn't think this would be a problem until I had to make a sharp turn, I found the my wheel was rubbing against the sway bar. Is it suppose to...
  10. TJ Tech Forum
    Greetings! After years of car talk with my Dad or anyone that was willing to contribute, today I purchased a hunter green '97 TJ 134k mi, completely rust free! (It was registered in Hawaii for her first 10 years!) Anyways, the previous owner put 32in tires on some aftermarket rims. It looks...
  11. JK Tech Forum
    I bought my 2012 JKU about a month ago and love it. I'm still getting use to the strange noises it makes (compared to my WRX) but I've noticed a rubbing/squealing noise coming from either the front left or rear left wheels. The noise stops momentarily while the brakes are engaged; which makes...
  12. TJ Tech Forum
    Like the title says.. When I press the clutch it pushes the flywheel too far back which ends up grinding the starter.. I recently bought this Wrangler, it's a 4.0l 5 speed.. Previous owner says its a new engine, also the clutch was replaced a couple months ago.. I bought a new starter and tried...
  13. Tires & Wheels
    Soo... I got my jeep about 3 months ago, and my spare tire was just stolen. :( I guess I am in the market for new wheels earlier than planed. I was looking at the Rugged ridge wheel 17x9 with 4.75 backspacing. Than I saw Fortec makes the same wheel with a 4.5 backspacing. There doesn't seem to...
  14. TJ General Discussion Forum
    What's going on guys, well I have this annoying issue when I flex not even to the max my tires end up rubbing against the outside wheel well area. What would be the best way to fix this? I'm unsure of the current lift height I bought my TJ as it is. Any help would be appreciated I will try to...
  15. JK General Discussion Forum
    putting on a 2.5 AEV lift and want to know if I need to get some spydertrax spacers... I have ordered 18x9 XD's with 35x12.5 nitto trail grapplers. The wheels have 5" backspacing. Does anyone currently run this set up? I don't want to have any rub whatsoever, even if its just light while backing...
  16. JK General Discussion Forum
    OK so i got the first round of upgrades on my 2012 JKUR. (6speed) - 3.5" AEV lift - AEV Pintler - 315 Duratrac tires 90% of the time when i start to accelerate I hear a weird rubbing noise coming from under the car. Initially i was told that it was wheel rub because I had stock wheel/tire on a...
  17. Tires & Wheels
    I have a 2012 jk and i've been looking at Baja MTZ 33x12.50x15 and i have done research but i haven't found what i was looking for. So I am wondering if the MTZ's will Rub or contact anything on a stock, not lifted 2012 JK. I'm willing to get wheel spacers and maybe flares but not sure if i want...
  18. JK General Discussion Forum
    Hey Everyone, I just got a 3.5" AEV lift installed on my 2012 JK. Other then the lift, the Jeep is a completely stock JK Unlimited Rubicon (Manual). I'm running it on stock wheels for now until my wheels get shipped. I've noticed that most of the time, when I start moving, there is a brief...
  19. YJ Tech Forum
    I just bought a Jeep and I noticed that if I turn the wheel all the way the tires rub on the leaf springs. The tires are Goodyear Wrangler with the dimentions of 31x10.50r15lt. I know that these aren't the stock tires but I think they are the stock rims. Any suggestion on what to do to solve...
  20. TJ Tech Forum
    so i just got some 31" BFGoodrich A/T not too long ago and i notice when i turn the wheel all the way to either side, they rub. i think theyre rubbing against the frame but im not completely sure. i havent rubbed them since i noticed that it does that. and i dont have a lift or anything. what...
1-20 of 20 Results
Top