Jeep Wrangler Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 28 Results
  1. JK Technical Discussion
    Hey WF! So I have a weird issue here... One day early last week, I started to be unable to shift gears easily. It felt to me live a failed slave cylinder, so I installed a new one and bled the system thoroughly. Shifting was still a bit stiff, so I bled it some more. I then took it for a test...
  2. JK General Discussion
    The throw out bearing failed on our Jeep. No biggie it was expected. Now that the clutch, pressure plate, and bearing have been replaced, there was no pressure on the clutch pedal and the fluid was leaking from the bell housing. So, I've replaced the slave cylinder. There's still no pressure...
  3. YJ General Discussion
    Aloha, I'm going to be replacing my Master Clutch and Save cylinder assembly on Saturday. Just wondering if I need to have my jeep in gear when I go to replace my Slave cylinder? Also all the videos I have seen skipped over the part where you actually put the slave cylinder piston into the...
  4. TJ Technical Discussion
    I'm looking for a little help diagnosing a clutch issue on my 2003 Jeep Wrangler Rubicon 130k. It's happened to me 3 or 4 times now and I'm looking for recommendations on what to replace first. The problem: After driving on the highway for 15 - 20 min, when slowing down on the exit ramp, my...
  5. Classifieds Archive
    ISO the plastic/nylon cap that fits over the throwout rod on the clutch slave cylinder for my 2002 Wrangler TJ, 5-speed. I managed to break mine, and now I'm running without. I'd prefer to not buy the entire new slave cylinder just for this one piece. Anyone have an extra laying around? TIA!
  6. TJ Technical Discussion
    I replaced the master and slave cylinder assy. and pumped on the clutch, all the brake fluid started to leak out from where the slave attaches to the transmission and brake fluid started to leak from the front of the bell housing. not sure what to do i cant build pressure in the system because...
  7. TJ Technical Discussion
    Threw the jeep into reverse backed up about 10 feet then BANG:censored:. No check engine light, so I crawled under the jeep to check the slave cylinder and its leaking so obviously the first move tomorrow is replace the clutch master and slave cylinder assy. with a duralast assy. from autozone...
  8. YJ Technical Discussion
    I have a '95 with the external slave cylinder and my clutch was starting to do nothing for the top 2-3" of travel and grind gears. I read up here how to bleed it, and nothing good has happened since. After attempting to bleed it the first time, it kept getting worse and worse and I came and...
  9. JK Technical Discussion
    So I'm replacing my slave cylinder. Put it in blue it all in I'm going to bleed it and it just sprays break fluid out the top (not from the bleeder) from the actual line connecting to it. Is there an O ring or some type of gasket that goes on the connection. It's grinding my gears and holding me...
  10. JK Technical Discussion
    So I'm replacing my slave cylinder. Put it in blue it all in I'm going to bleed it and it just sprays break fluid out the top (not from the bleeder) from the actual line connecting to it. Is there an O ring or some type of gasket that goes on the connection. It's pissing me off and holding me...
  11. TJ Technical Discussion
    Hi, Just swapped out my AX15 transmission on my 97 Jeep Wrangler. After I completed the job, with the engine off, I was able to shift through the gears without issue. I pressed the clutch pedal and it was easy the first few times then became extremely stiff. I removed the external slave...
  12. YJ Technical Discussion
    Hi there! I've had my 1990 Jeep Wrangler since I brought it brand spanking new! I just turned 144, 444. It's time to replace the slave cylinder. The master cylinder is fairly new. A friend has all the gear to lift the tranny out to replace the slave, so we are going to replace the whole...
  13. YJ Technical Discussion
    I have a 92 YJ 4.0 and 3 days ago it started a bunch of problems, grinding when I try to put it in reverse, grinding when I shift into third sometimes, when I let off the gas in fifth it makes a god awful whining noise and finally when I just have it in neutral and its rolling the shifter...
  14. TJ Technical Discussion
    I have a 03 tj 5 speed and something is wrong with clutch but im not sure what. It new something was wrong with it for a while but its finally causeing a problem. When i have it in neutral and the clutch let out it makes a rattling sound. And then the other day it started to smell like something...
  15. TJ Technical Discussion
    Hello all, I have been reading up on this forum for quite some time now. I have been searching for a fix to an issue that recently just started for me about two weeks ago with my 1999 TJ sport. The problem is mostly obvious when I am in a situation where I am working the clutch a lot, lets...
  16. YJ Technical Discussion
    Background Info: Just purchased my 1995 Jeep Wrangler Sahara with 155,000 miles on the odometer. It had been well taken care of and serviced religiously at the dealership with oil changes, etc. It has the 4.0 I6 engine in it with 3.55 gear ratio and the A/C option as well. Great buy, however I...
  17. TJ Technical Discussion
    I have a 2000 TJ 4.0 and it looks like my slave and pilot are bad and Im assuming im going to need a new clutch package anyway due to the vehicle being 14 years old. Which package would be best for my highway driving? I DO NOT take this jeep off-raod. Ive heard a lot about the Luk Brand and...
  18. YJ Technical Discussion
    I have a 93 wrangler with a brand new clutch and after 1500 miles roughly it quit working almost completely one day I had to shut it off put it in gear start it. with the clutch pedal pushed to the floor it would just sit and idle and seamed to function normally on take off but to shift I had to...
  19. YJ Technical Discussion
    I'm replacing my slave cylinder and, when I opened up the trans to get to it, I found the pin and retaining nut were in pieces inside the bell housing. Since the old pin piece I found is shorter than the new one that came with the clutch kit I'm suspecting that a small piece of the old pin is...
  20. YJ Technical Discussion
    Hey, 1989 Wrangler YJ, 5-speed, 2.5L. Pulling into my work parking lot this morning, my clutch started acting funny. The pedal went all the way to the floor, without much resistance, until it got to the last few inches, where it didnt wanna come back up. It did that a couple times, I tried...
1-20 of 28 Results
Top