Search Results for ‘tie rod’

I have the RPM 2.5 ton steering installed and I wanted to install the Apex Chassis ninja washers to keep the jam nuts from coming loose, they have come loose three times this past year on my tie rod. Are these the correct size from apex chassis...

Just finished up installing a leveling kit, when I finished I went ahead and checked all my steering components and noticed some up and down play on the tie rod end (drivers side). No twisting or up and down. Just curious if this is normal or if a replacement will be needed

I had the 2.5 ton RPM steering kit installed on my jl back in May. I drove it a week and by the end of the week both screws on the tie rod were unscrewed and came loose, so I had really loose steering, and I drive 100 miles a day for work. I went back to the shop and they fixed the issue, they...

Hi Everyone, Recently upgraded to the RPM Steering 1-Ton JK Steering Kit (Tie Rod and Drag Link). Upon getting it installed, it was found that my wheels at the time didn't have the proper backspacing to clear the tie rod ends. RPM's site page for the kit states that a 17" wheel with 4.75"...

This is a brand new unused Savvy 7075 Aluminum Ultimate Tie Rod for Currie Currectlync Steering. For '97-'06 Jeep TJs. It will come with the left and right jam nuts for the Currie tie rod ends. This does NOT come with the tie rod ends. This tie rod was never installed. I decided to use a...

I have a 2019 Sahara lifted 4.5 with 35's, I just passed 21,000 miles and its only been lifted for maybe 9K of those miles. I have a teraflex lift, with falcon 3.3 shocks, and control arms, but I also have a Falcon Nexus EF 2.2 Fast Adjust Steering Stabilizer. I have the stock tie rod and drag...

Hey guys new to the fourm.. Im looking to get a 1 ton steering kit but cant seem to find one i can use without using spacers. is there one that will just drop in? Im runnin 4 inch lift 37s and a skyjacker stabalizer id also like to keep. I wouldnt mind just some 1ton tie rods if they make those...

Ladies and Gentlemen! Welcome to the Ultimate Jeep Fight (UJF) II event... John Donnchadha (JD--The Irishman) versus 1994 Jeep YJ (The Blue Devil) In the The Blue Devil's corner: OEM tie rod and drag link ends.... (Looks like it was NEVER Changed!!) In the Irishman's corner: Rugged...

I have an 08 2 door Sahara and a 2.5" lift and Mickey Thompson wheels (4.5" of back spacing) and my tie rod ends are on their last legs. I'm looking to upgrade to a 1 ton aluminum steering kit, and they all seem to be about $500-$600. With the stabilizer clamp and after tax/shipping, Barnes is...

I have an 08 2 door with a d30 front axle, and it's coming to be time to upgrade my steering components. I'd rather upgrade than replace, and the Barnes 4wd tie rod and drag link look appealing. I'm currently on a 2.5" lift with 33s and would like to upgrade to 35s at some point. I do pretty...

Hi all, Currently my Jeep is stock as for suspension, I have a 2017 Willys JKU. I have been noticing a lot of shaking in the steering, like the dreaded death wobble, so I decided to check for anything visibly wrong under the Jeep and it looks like this tie rod end might be bent out of shape...

Hello, I want to replace my tie rod system with a heavy duty one and I was looking at the currie system, however the ones I saw said that they are for jeeps with a lift. I don't know if my jeep has a lift or not, I bought it used, but a couple mechanics said it looks stock to them. Is there a...

Hello folks, My 13' Sahara Unlimited just failed the state inspection (NY) because tie rods were loose. The tech showed me the rod is moving by putting a minus driver into the gap and pushed with a little force. He said it should've not moved at all, rock solid, but it was moving a little...

My Currie Currectlync steering comes very close to hitting the diff cover on my G2 axle. I just now noticed Currie makes a version of their Currectlync steering kit (CE-9701M) with a bend in the tie rod to clear one of their 9" front ends. I wonder if this would give more clearance in the...

I just got my 2009 Jeep Wrangler in October and I am new to the jk world and the maintenance that goes with it, but I'm learning. Let me start with my first mistake: I let someone borrow my jeep for a few days while I was out of town. Got it back and only minutes after driving it noticed a...

Should the tie rod move somewhat freely in the up (towards hood) and down (towards ground) axis with tires pointed straight ahead? Mine looks bolted down property but moves with ease by hand. I think I am hearing it "clunk" when going over small bumps when turning the wheel. Recently had front...

So, I just picked up a 2008 JK and it seems to have a couple problems that I'm having trouble pinpointing. I searched through the forum for a post about the first problem, which is the steering wheel feels really loose. I've looked online and from what I've been reading it seems to be caused by...

I have a few things off my 2015 jku sport. All prices are based on local pickup. If you want shipped, then let me know zip and i will price it out. -oem headlights $40 -white tail gate hinges- $30 -stock springs and shocks - $10 each -oem black fender flares - $100 -stock front driveshaft - it...

So dropped off the rig this AM to get the next build phase going. When the kid drove it in from the parking lot to the shop, noticed that he went and got the lead tech / co owner, who then also drove it around a bit. he then came and got me to bring me back into the shop. apparently in...

So, my 2004 TJ has developed the death wobble. I checked all applicable steering/suspension components and can feel a slight "thunk" in the drag link/tie rod/pitman arm when the steering wheel is turned back and forth. I am guessing it is the drag link ends ... but .... 1. Without dissembling...