Search Results for ‘troubleshooting’

I was driving one day and lost all power inside the cab, but the engine still ran. Dash/gauges, horn, steering column controls, radio, and air/temp control all don't have power but vehicle was able to turn over and stay running. I didn't see any popped fuses or ground issues. Any idea why I have...

The jeep is not lifted but does have after-market shocks on it, for some reason. Symptoms The steering wheel feels a bit loose. I'm able to rock the jeep up and down easily by pushing up on the roof. My nephew described shaking at high speed (over 55 or 60). Horn doesn't work. - I can't...

New to the Jeep Community and Jeep Forums and need some help, btw not sure if this thread is in the correct spot Jeep JK unlimited —First I got this installed JKS J-Venture 3.5” lift kit w/fox adventure shocks JKS front & rear fixed length lower control arms JKS front and rear track bars 35”...

Brand new brakes and rotors Power Stop Jeep Wrangler Z23 Evolution Sport Brake Rotor & Pad Kit - Front & Rear K2798 (07-18 Jeep Wrangler JK) Here's the video, first turn signal is me turning right, next is me turning left. https://youtube.com/shorts/IZRUutC9OuU?feature=share Installed them...

Hey y’all, I’m new here so forgive me if this has been brought up before. My dad has a 95 YJ Sahara edition Jeep. It still had the factory top on it. We ordered a new one from a solid seller on Amazon that was suppose to fit a 95 YJ but it didn’t work. Dads Jeep has rounded doors and the cover...

All, New to the forum and jeep ownership. I have an 89 YJ, approx 159K miles, 2.5L 4 cylinder. I've had the jeep for a couple of weeks and have noticed more oil leaking issues as I've driven it more and it riding more rough. I picked up a Haynes manual and working through trouble shooting. is...

I have a 4 door 2007 JK My Right Rear window will not roll down. What I've tried: -I swapped doors with the left rear to test if it was a car side electrical issue, and not getting signal to the window.The window switch operates the left rear door window fine. -I then assumed it was the...

Hi, I'm new to the forum! I'm Eli and I've had my jeep for a couple of years doing all most all repairs myself. I have encountered a new issue that started randomly with seemingly no cause. My 1994 YJ 2.5L is just about to hit 200k miles and recently, I'll lose power under load or when under...

I had a set of spider gears go bad on the rear differential of my 2005 Jeep Wrangler X w/Dana 35. The replacements finally arrived, but I cannot get the dang things to go back in. Any suggestions? I'm running a Dana 35 with limited slip 3.73 gears. I purchased a PowerTorque Posi Nest Kit...

I have been reading these forums for years now but finally failed to find something. So I had to broke down and am posting for the first time. I am looking for an all purpose ODBII CAN-Bus tool for the JK (specifically a 2015). There are tons of generic scanners that scan only universal...

So I drive a 92 YJ 4.0 5spd, and my check engine light came on (5th gear, accelerating past 50 mph, 1750ish rpm) recently on my way to town. I pulled over, checked all my gauges and popped the hood. Visually and audibly everything seems fine. I killed it and restarted it, and the light went...

Okay, so I thought I had this one, really. Followed the instructions got it set up, turned on the jeep and the touch screen fired up and I could even start the config. Said alright, shut the jeep off and turned off the screen and started installing the lights. Got one of the lights wired and...

Ok, so I'm a rookie and need some help! Bought a 2015 JKU in November. I'm attempting to install OEM running boards, but the 2 of the 3 holes don't seem to be lining up...despite the instructions stating no drilling was required. Am I missing something?

I need some help troubleshooting a probably self-caused issue on my 2016 JKU Sport S... On Saturday, I removed the front and side turn signal lights (4 lights total) because I wanted to lightly smoke them with VHT nightshade. I taped up the connection port, cleaned the lights with denatured...

since i change lifter when i start the engine the rpm go at the top. I stop the engine. i look for vaccum leek i don't find it. i try the reset ecu and don't change. do you have any idee

Thought I should share this story. Might save someone else some money in the future. I live in Central British Columbia and thought my 2009 Jeep Wrangler should probably go to Moab, Utah. I put about 4000 kilometers on it driving down there (had to go to Vegas etc. lol) but long story short it...

Hello, I have a '99 Wrangler 4.0, 5-speed that gave me a little trouble today. I was in first gear pulling into an intersection going up hill. When I had the clutch about 1/2 way engaged, I heard a clunk and grind and the Wrangler would no longer engage in any gear. I had the Jeep towed...

Hey Everyone, I recently bought a M8000 Warn winch from my uncle and plan on mounting it on my 13' JKUR. However, the wiring is a little more complex than a simple + and - to the battery. I have a wiring diagram but still cant seem to get the darn thing working. I tested the motor and it is...

Hey Guys, So this is my first post, and I'm hoping its in the right place. A couple of weeks ago, I went to start my '02 TJ, and lo-and-behold it did not start. It acted like I did not have the clutch pushed in, and while I could turn the radio and stuff on, It would not start. It didn't...

My 1992 Jeep Wrangler got stalled a few times after a new driver tried to learn on it and the last time it stalled it went dead. Now it will not start, the starter won't even try to turn, it is not cranking The battery is good and So is the starter. I got them both tested. Also the ignition...