Jeep Wrangler Forum banner
yj
1-18 of 144 Results
Advanced
  1. JL Wrangler Technical Discussion
    Hello, I'm curious if wrangler transfer case bolt patterns and splines are the same. Specifically, a 2020 Rubicon transfer case into a 1995 YJ.
  2. YJ General Discussion Forum
    Hey all! Looking at buying this YJ, private owner sale. It's a '94, 171,000 miles, selling for $5,200. People who know a lot more about these than me, is this a reasonable price? It seems like it to me. The guy says there's no rust, pics look nice. It's black, soft top. Clean title...
  3. YJ General Discussion Forum
    I have a 1994 YJ 4.0. I have full hard doors on it right now but they are two different styles and I don't know if either one are supposed to be on it. Different window crank handles, one has chrome trim on the upright between the wing and regular window. I heard that the OEM doors for the...
  4. YJ Tech Forum
    Hey there, I've owned/driven Jeeps since I was 16 (Liberty, Patriot, Compass) but have always dreamed of having a Wrangler. This year, I made that dream into a reality when I bought my 1990 Jeep Wrangler YJ. Found it on Facebook Marketplace, flew out to San Diego, and drove it back to...
  5. YJ General Discussion Forum
    I have an 88 Sahara that has had its original seats replaced. I love the look of them and really want to find some I can install (both front seats and bench) but I haven’t been able to find anything for sale. Any ideas on where to look/replacements that look similar, (the current seats are...
  6. YJ General Discussion Forum
    I've googled and searched high and low but can't find out how to fix my problem. Picked up my 1990 YJ a couple of months ago, 4.2L running 33s with 2.5" body lift. When the engine is cold, steering is perfect, once it heats up (maybe 15 minutes) the steering is hard at low speed like in a...
  7. YJ General Discussion Forum
    Newbie here. I have a 90 YJ and found a TJ instatrunk for sale. Does anybody know if it will fit? They are not in my town but I'd drive to get it if it fits. Thanks
  8. YJ Tech Forum
    Below I have posted a few photos of my new front headlights. They seem to be a completely different size and don’t fit the YJ at all. Any ideas what i am missing? (The car is an original European model and I ordered the lights from Quadratec)
  9. YJ Tech Forum
    I suddenly lost power driving. Engine will crank but not start. Cannot hear fuel pump run when key is turned on. Relay checks out OK. At the electrical pump plug, I get 6 volts on one leg, 8.5 on the other. Testing on the pump side, both outside leads (one yellow, one gray) go to ground. I'm...
    yj
  10. YJ Build Forum
    I've never owned a Jeep, so I've dove into a new project. It's a true basket case, complete with bins full of parts I'm still trying to identify, and the SBC V8 came separately. Seems to have a good start, a lot of Advance Adapters parts, AX15 tranny, 231J transfer case, 4" body lift already...
  11. YJ Tech Forum
    I have a 93 Jeep YJ, it is a Manual with the 4.0L- it shredded the serpentine belt (so I don't have the old to measure against), I have ordered 2 belts from parts stores = got 2 different sizes = I am convinced they have no clue about Jeep parts... simple fact is I can't get either fit. One is...
  12. YJ Tech Forum
    Hey... doing a rebuild on a ‘95 YJ... need help with the fuel roll over line (?) pics attached. Mines broken and I’m not sure if it’s just a vent or it attaches somewhere. It follows the same lines for fuel up the frame. Having trouble finding a clear diagram. Hoping someone can help!
  13. YJ Tech Forum
    I’m looking for a Kent Moore J-36306 Rear Crankshaft Oil Seal Installer tool. I’ve found them on eBay for $50. (Used only once of course) I just hate to spend that money for a tool that I will use for just 1 minute and probably never again. Does anyone know of a parts store that has one as a...
  14. YJ Tech Forum
    After I installed the 2.5" RC lift I took it for a drive and noticed there was a vibration. I've read a lot on the forums that this issue might happen so I bought some washers and dropped the transfer case 1". I marked the slip yoke to see how much difference before and after the t/c drop, but...
  15. YJ General Discussion Forum
    Hi all, How can I measure the lift size in my YJ?
  16. CJ Tech Forum
    I am a first time jeep owner and purchased a 1988 YJ with a 2.5l, I have been having a lot of problems with it, so I decided to do a carb conversion after reading a thread on this page. So far I have purchased a rochester single barrel carb, CJ7 distributor with the vacuum advance, and also a...
  17. YJ Tech Forum
    I am a first time jeep owner and purchased a 1988 YJ with a 2.5l, I have been having a lot of problems with it, so I decided to do a carb conversion after reading a thread on this page. So far I have purchased a rochester single barrel carb, CJ7 distributor with the vacuum advance, and also a...
  18. YJ Tech Forum
    It needs to be replaced. It is NOT the oil pan gasket. It is a leaking rear main oil seal. (kinda expected after 230,000 miles) There are plenty of videos online showing how to replace the 4.0L 6 cylinder main seal (the two piece seal) that is simply removing the oil pan and the bearing cap...
1-18 of 144 Results
Top