Jeep Wrangler Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Looking to regear 3.8 6 speed. Running 35's and can't hardly use 5th or 6th gear! I use this mostly just to drive around town (small town) but once in awhile hit the highway. Who can shed some light on what gears I should go with? Will be looking to get ARB lockers with it. Thx
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3
Thx I appreciate the feed back! That's what I was leaning towards. Any suggestions on what and we're I should go with? I heard yukons pretty good?
 

·
Registered
Joined
·
810 Posts
It's my understanding that most of the brand name gears are made in the same plant.. I went with Yukon. Make sure they do all the seal/bearings in both diffs. The front Dana 30 will need a new carrier for the 4.56's. Out the door was under $2000 in the Dallas area.
 
1 - 4 of 4 Posts
Top