Jeep Wrangler Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2,053 Posts
Discussion Starter #1
I've been messing with trying to get the parking brake working on my 09 since I got it 2+ years ago. Had it working once and then all the sudden it would not work and the handle could be pulled up all way. Kind of wondered what the tapping noise was that I heard from the right rear. Went to replace the rear pads and rotors and found that the cable had slipped off the actuator. slipped the pin into the actuator and voila, the parking brake is working again. Is there any way to keep the cable secure to the actuator? It just seems to slip over the ring on the actuator.
 
1 - 1 of 1 Posts
Top