Jeep Wrangler Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I bought my Wrangler a year ago and thought I just needed to deal with this issue, but I'm finally trying to take some action to correct it. Under the black rail that bolts down to the tub, I have a partial sticker/metallic rail that seems to act as a snap lock. It's missing on a good portion of one side of the Jeep, as seen in the picture. It's there on the other side, and that side locks in fine. I can't get the soft top to lock in in the area without this sticker. I can't seem to find this thing anywhere. Any suggestions?
 

·
Registered
Joined
·
2,207 Posts
Got another pic? More from the side? Don't understand"snap lock"
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Snap lock isn't the best term, it seems like this piece keeps the soft top snapped in place, hence 'lock'. Anyway, here's anyother picture, maybe this one will help? This silver/chrome piece is a very narrow 'sticker', it doesn't extend up under the rail hardware.
 

·
Registered
Joined
·
2,207 Posts
your pic is still too close. is what you need part of the bolt on piece that the top tucks up under to hold it in place?
 
1 - 4 of 4 Posts
Top