Jeep Wrangler Forum banner

2003 Rubicon

884 2
I want to put a 6 inch rough country x short arm lift on my jeep with 37x12.50x17 tires. I know that the tires will fit but will this be too much stress even though it's a rubicon and has the Dana 44 axles and heavy duty rock transfer case??

Thanks y'all
Colt

Attachments

1 - 3 of 3 Posts

· Registered
Joined
·
119 Posts
I wouldn't run 37's on a stock TJ 44 at all. You could probably get away with 35's (but will be fixing things as they break).

I have the rear 44, and I am running 33's. I may go up to 35's, but I'm going to be doing upgrades to it first.
 

· Registered
Joined
·
147 Posts
I ran 36's on my rubi 44s. Destroyed the gears in the rear locker. Changed to an ox locker and destroyed shafts. Upgraded to a 60 rear. Still have the rubi front 44 It has alloyusa shafts and I run 39s but I have to be conservative or it'll eat shafts. So you can get away with it....... But you're playing with fire
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top