Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter #1
Alright guys so I posted before about installing the power door actuators in my 2012 jeep but I got that figured out. So now I have the electric life kit with the actuators installed but i need a keyless entry and remote start system to control them. This is where I have a few questions... I was thinking the Avital 4103 as my keyless entry/remote start system.

Should I get the xpres DBall kit as well? Will those be the only things I need? Or are there any of those t connectors that will make this easier? I am not sure because most write ups I see the person already has a factory keyless entry and are just adding the remote start system.
 

·
Registered
Joined
·
50 Posts
Discussion Starter #2
I ended up buying the Avital 4103 remote start, Dball2, and CHTHD2 harness. I just need to get the DBall flashed and I think that will be all I need. I plan to do a write up on this as there is not a real how to for installing power lock actuators and remote start system for 2012-2013s.

I will update when I get to install this when it's not 0 degrees outside.
 
1 - 2 of 2 Posts
Top