Jeep Wrangler Forum banner

2012 Sahara Tan JKUR

10209 Views 30 Replies 21 Participants Last post by  panthermark
I've had quite a few questions about this Jeep so I figured I'd post a thread here to show its specs.

2012 JKUR
AEV 3.5 then 4.5
AEV Rear bumper and Tire Carrier
AEV CHMSL
AEV Mil Spec bumper
AEV Procal
AEV High Steer Kit
River Raider Off Road Skid Plates
AFE Y-Pipe
Rugged Ridge D Ring Mounts
Warn 9.5cti
Viking off Road Synthetic Winch Line
Viking Hook
IPF Driving Lights hooked to Factory Harness
Rubicon Express Aluminum Fairlead
Riddler Diff Covers front/rear
Lube Lockers
Vortex Bed Lined the entire tub
Mopar Slush Mats
Lloyd rear mat

Wheels were painted with Plasti-Dip
Might be more but cant remember right now...






Out to Rausch again. Went on a tuesday and had the entire park to ourselves.







Installed RROR skid set, shortened factory antenna, and some other odds and ends.


See less See more
15
1 - 20 of 31 Posts
Bought the teraflex exhaust spacers and tested them out

Skids were prepped and POR15'd then I sprayed the bottom with some camo tan.









Also sprayed the tub with Vortex






See less See more
15
WOW! You're not fooling around! I doubt very many owners have gotten as far as you have with a 2012.

Radically beautiful!! :thumb::thumb::thumb:
Wow, I never really liked the matching tops, but I have to admit I kinda like in in tan. Those are some nice trails at RC. I have pics of my JKUR on the same trail. :thumb:
WOW! You're not fooling around! I doubt very many owners have gotten as far as you have with a 2012.

Radically beautiful!! :thumb::thumb::thumb:

Thanks, I have been fortunate to be able to do most everything I've wanted. Still a few things on the list, but there's plenty of time.




Wow, I never really liked the matching tops, but I have to admit I kinda like in in tan. Those are some nice trails at RC. I have pics of my JKUR on the same trail. :thumb:
Funny, I went in trying to make a deal with the dealership to buy a 2011 tan Rubicon and have them order/paint the flares and top. Settled on it and then they couldnt find Rubicon in Sahara Tan, told me to wait for the 2012's. Somebody at Jeep was thinking like me!
Amazing,.........simply awesome!
Very nice! Great looking Jeep.
Bravo! Really, really nice :thumb:
You built it the way I would have, just love that Sahara Tan!!
I am not worthy...I am not worthy...I am not worthy...
OMG, I mean Oh My Gosh! I mean Oh My GOD, that is beautiful!! :thumb:
Could you tell me what spacers you're using and what size tires. The Jeep looks great!
Thanks,
Bob
Walker111 great looking Jeep :thumb:

Any tips on the bumper install? Is cutting of the frame required on the 2012? Any thing else that would be helpful? Plan on ordering mine next week
So Nice !!!!:thumb:
Could you tell me what spacers you're using and what size tires. The Jeep looks great!
Thanks,
Bob
The are spidertrax 1.5 spacers with 17" Moabs plasti-dip'd black with BFG KM2's 35x12.5x17

Walker111 great looking Jeep :thumb:

Any tips on the bumper install? Is cutting of the frame required on the 2012? Any thing else that would be helpful? Plan on ordering mine next week
No cutting what so ever. Its a very easy install, just take your time and I use anti-seize on everything.
Thanks for all the compliments guys.
Finally got around to cleaning the under carriage. While it was clean I put a coat of POR15 on. Also washed, waxed, and put some flat black stickers on. Installed smitybuilt storage bags and took a couple more pics of the interior (bed liner).







See less See more
7
1 - 20 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top