Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello!

I've been experiencing a couple of AC issues lately and the most recent issue I need help with. About two months ago my blower motor went out; I replaced the motor and suddenly the AC would not switch from Cold to hot.
I realized the AC temp door actuator was bad so I replaced it. After this, the temp dial would only change the temp from cold to hot, nothing in between. I figured it was the panel, so I replaced this yesterday. I tested the switch after replacing and it worked fine. I got in the car this morning and it's back to only cold or hot. in order to change the temp, i have to turn the dial all the way to cold, or all the way to hot. There is no gradual change, only one or the other.

Has anyone experienced this before and could offer insight?
 

·
Retired Moderator
Joined
·
100,448 Posts
:welcome: to the Forum..:wavey:

Congrats on owning a Wrangler!
 
1 - 2 of 2 Posts
Top