Jeep Wrangler Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
208 Posts
Discussion Starter #1
Hi Guys

Have the 430N stereo. Have flashed it so that in reverse I see the backup black screen (can't remember what it says.

I have run the wires back from the camera. Now how do I go about connecting them to the stereo (2014 JKU). I believe it has a rca from the camera and a power feed which I have from reverse. Not sure how these physically connect to the stereo

Cheers
Al
 

·
Registered
Joined
·
668 Posts
P.S. all you have to power is the camera itself. The radio get's the trigger from the canbus.

Sent from my ONEPLUS A6013 using Tapatalk
 

·
Registered
Joined
·
208 Posts
Discussion Starter #4
So where did you connect the power from the camera too..does it matter..I have the wires run all the way to the side of the drivers dash where I can take the panel off. If I tap into an always on will that work

Al
 
1 - 5 of 5 Posts
Top