Jeep Wrangler Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
This is our first Jeep and we need it as a flat tow vehicle for RV trips. Because it's our first I make certain I follow the manual very carefully (even doing the extra steps to verify the vehicle will not move when transfer case is in neutral). When I have the transfer case in neutral and I go to test, as stated in manual, I move transmission gear to drive and sometimes get rapid clicking noises until I shift back into N...when I go right back into D it is fine. Can anyone give me some feedback regarding this issue? Thanks
4493580
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top