Jeep Wrangler Forum banner
1 - 1 of 33 Posts

· Registered
1,840 Posts
I've got about 25k on my drive shafts now with a 3.5in lift (netted about 4in.). I did the exhaust spacer & rear upper control arms. Nothing rubs & my drive shafts are still fine & I disco all the time. I went into it knowing the drive shafts could go at any time, I just keep an eye on them.
1 - 1 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.